Products : Automotive, 228, 190, 210, 410, 320, 330/370, 380 and DC

UP12-P PEEK gear pump 36 l/min

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service, transfer of water.

UP14/E electronic water pressure pump 46 l/min

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. PCS control panel included.

UP14-LP PEEK gear pump 33 l/min

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body, stainless steel shaft. Main applications: water transfer, cooling.

UP2/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

UP3/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

UP8-P heavy duty pump, PEEK gears, 10 l/min

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.

UP9/OIL (ex UP6/oil) gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

EM1 Stainless steel horn, long

Single electromagnetic horn with stainless steel trumpet. Powerful acoustic unit carefully protected and manufactured of non-corrosive materials, complete with fixing hardware.

EMX2 Horn, stainless steel short

Single or double electromagnetic horn with stainless steel trumpet , bracket and membrane. New support design with integrated cable. Complete with fixing hardware.

GT51 brass chromed horn, 68 cm long

Compressed air horn for external mounting. Powerful sound. Brass chromed trumpet, complete with fixing hardware, excluding control valves. Available in three lengths: 750 mm - 680 mm - 600 mm.

GT52 brass chromed horn, 60 cm long

Compressed air horn for external mounting. Powerful sound. Brass chromed trumpet, complete with fixing hardware, excluding control valves. Available in three lengths: 750 mm - 680 mm - 600 mm.

MT1-L chromed horn, low tone

Single or double electromagnetic horn. Acoustic unit carefully protected and manufactured of non-corrosive materials. Entirely chrome plated, complete with fixing hardware.

OCK8-E Reversible electronic oil change kit 10 l/min with flow regulation

Electronic oil change kit 10 l/min with integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate. The flow rate is also automatically adjusted according to the viscosity of the fluid to avoid cavitation. Best for oil and diesel transferring. Compact and Easy to operate and carry. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. NOW AVAILABLE !

P1/S brass chromed horn, external mounting

Compressed air horn for external mounting. Brass chromed trumpet, complete with fixing hardware excluding control valves. Available in two lengths: 500 and 590 mm.

P2/M-E 12V Electronic Multisound horn 3 trumpets

Compressed air horn with 7 sound. Complete with electric valves and electronic alternating device. Metal chromed trumpets. Installation in engine compartment.

TP2 metal chromed horn, internal mounting

Twin tone horn for compressed air with metal chromed trumpets for installation in engine compartment, complete with fixing hardware, excluding control valves.

TP2/130 metal chromed horn+ electric valve

Twin tone horn for compressed air with metal chromed trumpets for installation in engine compartment, complete with fixing hardware and electric valve.

UP1 pump rubber impeller 35 l/min

Self-priming electric water pumps with selflubricating flexible impeller for prolonged service life and better performance. Nickelplated brass body with stainless steel shaft.

UP10 heavy duty pump 18 l/min

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP10-P heavy duty pump 18 l/min - PEEK gears - FKM O-Rings

Self-priming electric pumps for transferring of liquids up to 7 bar pressure. Pump body in nickel-plated brass. Main application: high pressure spraying.

UP12 bronze gear pump 36 l/min

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP12/A water pressure system PEEK gears 36 l/min

Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

UP12/E electronic water pressure system 36 l/min

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP12/E-BR bronze gear pump with electronic pressure sensor + SCS 36 l/min

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP12/E-LOBR electronic pump for oils, bronze gears + SCS

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP12-LOCK portable gear pump kit for oil and diesel

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps and for engines lubricating operations.

UP12-PV PEEK gear pump 36 l/min with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

UP14/E-BR bronze gear pump with electronic pressure sensor + SCS 46 l/min

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP1-J pump, rubber impeller 28 l/min

Self-priming electric pump with rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.

UP1-J/OIL flexible FKM impeller pump for oil

Flexible FKM impeller pump for oil. Self-priming electric pump with flexible impeller in FKM for oil. Nickel-plated brass body, stainless steel shaft.

UP1-JR reversible impeller pump 28 l/min with on/off integrated switch

Professional range of self-priming electric 12V and 24V pumps. Ideal for bilge and waste water on any type of boat. ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

UP1-JS impeller pump 28 l/min with integrated on/off switch

Professional range of self-priming electric 12V and 24V pumps. Ideal for bilge and waste water on any type of boat. ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

UP1-M pump, rubber impeller 45 l/min

Self-priming electric pump with selflubricating rubber impeller. Now available in 3 different flow rates: 25, 35 and 45 liters/minute. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.

UP2 bronze gear pump 10 l/min

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP2/E electronic water pressure system 12 l/min

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP2/E-BR bronze gear pump with electronic pressure sensor 10 l/min

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP2-P PEEK gear pump 10 l/min

Self-priming electric pumps with PEEK gears. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.

UP2-PV PEEK gear pump 10 l/min with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

UP3 Bronze gear pump 15 l/min

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP3/A water pressure system 15 l/min

Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

UP3-CK portable gear pump kit 15 l/min

Self-priming electric pump with bronze gears for diesel transfer. Featuring a new case with handle for improved protection and easy transport. Completed by On/Off switch, cable with integrated fuse and battery clips.

UP3/E-BR bronze gear pump with electronic pressure sensor + SCS 15 l/min

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seals and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP3/OIL-R revers. pump lubricating oil + integr.on/off switch

Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

UP3/OIL-S 12V Pump lubricating oil with integr. on/off switch

Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

UP3-P PEEK gear pump 15 l/min

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.

UP3-PV PEEK gear pump 15 l/min with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

UP3-R gear pump 15 l/min with integr. reversible switch

Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, light oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

UP3-RK reversible pump kit with panel 15 l/min

Diesel transfer Kit with electronic control. During priming the speed of the pump increases and the system automatically shuts off in case of empty tank and short circuit. Being equipped with a reverse-flow function system, this kit is particularly indicated for tank balancing operations on board.

UP3-S gear pump 15 l/min with integrated on/off switch

Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

UP6 bronze Gear pump 26 l/min

\\Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP6/A water pressure system 26 l/min

Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

UP6/E electronic water pressure system 26 l/min

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Available also with control panel.

UP6/E-BR bronze gear pump with electronic pressure sensor + SCS 26 l/min

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP6-P PEEK gear pump 26 l/min

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service, transfer of water.

UP6-PV PEEK gear pump with check valve 26 l/min

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

UP6-RK reversible pump kit 20 l/min with panel

Electronically controlled pumps for oil and diesel filling and draining operations. The touchpad electronic sensor adjusts the speed of the motor according to the liquid viscosity and temperature. Compact design. Fits in any engine room. Automatic shut-off in case of empty tank, short circuit and after 30 minutes of operation. Fittings with 1 or 2 valves available.

UP8 heavy duty pump 10 l/min

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP8/E-BR bronze gear pump with electr. pressure sensor + SCS 10 l/min

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seals and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP8-RE reversible electronic pump 10 l/min with flow regulation

Heavy duty Electronic Gear pump 10 l/min and 3,5 bar. Integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate; the flow rate is also automatically adjusted according to the viscosity of the fluid to avoid cavitation. Best for oil and diesel transferring. Compact and Easy to operate and carry.

UP9 Heavy duty pump 12 l/min

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP9/A heavy duty water pressure system 12 l/min

Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

UP9/E electronic water pressure system 12 l/min

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits, campers.

UP9-P heavy duty gear pump 12 l/min - PEEK gears - FKM O-Ring

Self-priming electric pumps for transferring of liquids up to 5 bar pressure. Pump body in nickel-plated brass. Main application: high pressure spraying.

UPX gear pump 15 l/min - s.s. AISI 316 L

Self-priming electric pumps for transferring liquids for the food industry. Pump body and connections in stainless steel. O-Rings made of Silicone.

VP45 Battery kit with 45 l/min vane pump

Self-priming electric vane pump with integrated by-pass valve. Aluminum body. Two options connection for 25 mm pipe. Rotor and vanes made of resin. Brush holder with EMI filter. Main applications: diesel, oil and anti-freeze refuelling. Available also with case and handle for easy transport, On/ Off switch and battery clips.

VP45A-S vane pump with on/off switch 45 l/min, brass fittings

VP45, in all its versions, is also available with brass hose fittings ¾ BSP for hose Ø mm 20.

VP45-K refuelling kit with 45 l/min vane pump

Kit for diesel refueling. Includes the vane pump with integrated by-pass valve and battery clips. Refueling gun, 2 m priming hose, 3 m delivery hose and intake filter.

VP45-N vane pump 45 l/min

Self-priming electric vane pump with integrated by-pass valve. Aluminum body. Two options connection for 25 mm hose. Rotor and vanes made of resin. Brush holder with EMI filter. Main applications: diesel, oil and anti-freeze refuelling. Available also with case and handle for easy transport, On/Off switch and battery clips.

VP45-S vane pump 45 l/min with integrated on/off switch

Professional range of self-priming electric 12 V and 24 V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap.