Products : Marine, 180, 150, 360, 90, 50 and 250

UP9/OIL (ex UP6/oil) gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

UP6/E electronic water pressure system 6.9 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP3/E electronic water pressure system 4 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP2/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

UP1 pump rubber impeller 9.2 gpm

Self-priming electric water pumps with selflubricating flexible impeller for prolonged service life and better performance. Nickelplated brass body with stainless steel shaft.

UP3/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

UP12/E electronic water pressure system 9.5 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP1-J pump, rubber impeller 7.4 gpm

Self-priming electric pump with rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.

UP9 Heavy duty pump 3.2 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP8 heavy duty pump 2.6 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP6 bronze gear pump 6.9 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

M1 compressor

Air compressor for horns

UP2/E electronic water pressure system 3.2 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP2 bronze gear pump 2.6 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP1-JR reversible impeller pump 7.4 gpm with on/off integrated switch

Professional range of self-priming electric 12V and 24V pumps. Ideal for bilge and waste water on any type of boat. ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

UP3/OIL-R revers.pump lubricating oil + integr.on/off switch

Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

UP6-P PEEK gear pump 6.9 gpm

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service, transfer of water.

UP12/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps and for engines lubricating operations.

UP8-P heavy duty pump, PEEK gears 2.6 gpm

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.

UP12 bronze gear pump 9.5 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP12-P PEEK gear pump 9.5 gpm

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service, transfer of water.

UP9-P heavy duty gear pump 3.2 gpm - PEEK gears - FKM O-Ring

Self-priming electric pumps for transferring of liquids up to 72.5 psi pressure. Pump body in nickel-plated brass. Main application: high pressure spraying.

UP2-P PEEK gear pump 2.6 gpm

Self-priming electric pumps with PEEK gears. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.

UP1000 submersible pump 16.6 gpm

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

UP2000 submersible pump 33.3 gpm

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

UP3/AC gear pump

Self-priming electric pump for transferring diesel and viscous liquids. Brass gears, pump body and connections in nickel-plated brass, shaft in stainless steel. Seal in FKM and O-ring in NBR.

OCK1-R Oil change Kit with integrated reversible switch

Compact size oil change kit. Easy to operate and carry. Complete with bronze gears pump, clips, fuse, hoses and accessories for transfer operations. Available also with electronic control panel and 12/24V universal voltage.

UP8-RE reversible electronic pump 2.6 gpm with flow regulation

Heavy duty Electronic Gear pump 2.6 gpm and 50.8 psi. Integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate; the flow rate is also automatically adjusted according to the viscosity of the fluid to avoid cavitation. Best for oil and diesel transferring. Compact and Easy to operate and carry.

VP45-N Vane pump 11.9 gpm

Self-priming electric vane pump with integrated by-pass valve. Aluminum body. Two options connection for Ø 1" hose. Rotor and vanes made of resin. Brush holder with EMI filter. Main applications: diesel and anti-freeze refuelling. Available also with case and handle for easy transport, On/Off switch and battery clips.

OCS6/E electronic Oil Change System - 6 BSP Valves

Compact oil change electronic systems for fixed boat installations. Conceived for oil fill and drain operations for all on-board uses like generators, engines, transmissions and catwalks. Their electronic control adjusts the speed of the pump according to oil viscosity/temperature and increases its speed during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation. OCS are indicated for a perfect cleaning of all on-board areas while avoiding leaks and dispersions on the boat floor. Easy to operate and carry.

UP8/E-BR bronze gear pump with electr. pressure sensor + SCS 2.6 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seals and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP6-PV PEEK gear pump 6.9 gpm with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

UP3/A water pressure system 4 gpm

Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

UP6/A water pressure system 6.9 gpm

Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

OCK1 oil change Kit

Compact size oil change kit. Easy to operate and carry. Reversible: draws and fills oil. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. Available also with electronic control panel and 12/24V universal voltage.

DP12/E deck washing pump + electronic control 87 psi

Complete kits including an electronic self-priming electric pump with electronic control. Equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

OCS9/E electronic Oil Change System - 9 BSP Valves

Compact oil change electronic systems for fixed boat installations. Conceived for oil fill and drain operations for all on-board uses like generators, engines, transmissions and catwalks. Their electronic control adjusts the speed of the pump according to oil viscosity/temperature and increases its speed during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation. OCS are indicated for a perfect cleaning of all on-board areas while avoiding leaks and dispersions on the boat floor. Easy to operate and carry.

UP2-PV PEEK gear pump 2.6 gpm with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

UP12/A-V5 water pressure system+ 1.3 gal tank

Water pressure systems equipped with accumulator tank. Protected by an integrated fuse. The pumps can supply up to 5 faucets at the same time and are suitable for boats up to 60 feet. Extremely compact, they are easy to be installed in the engine compartment.

UP6-RK reversible pump kit 5.3 gpm with panel

Electronically controlled pumps for oil and diesel filling and draining operations. The touchpad electronic sensor adjusts the speed of the motor according to the liquid viscosity and temperature. Compact design. Fits in any engine room. Automatic shut-off in case of empty tank, short circuit and after 30 minutes of operation. Fittings with 1 or 2 valves available.

VP45-S vane pump 11.9 gpm with integrated on/off switch

Professional range of self-priming electric 12 V and 24 V pumps for the refueling and transfer of water and diesel with ON/OFF switch integrated into the water-proof cap.

SP2 Shower pump kit

Shower kits complete with self-priming pump with electronic control. Equipped with helical PEEK gears, nickel-plated brass body and connections, integrated check valve. Complete with 4 m white hose with screw connections and hand washer equipped with built-in white container. The kit is especially suitable for yachts, rubber dinghies and sailing boats.

VP45-K Refuelling kit with 11.9 gpm vane pump

Kit for diesel refueling. Includes the vane pump with integrated by-pass valve and battery clips. Refueling gun, 6.6 ft priming hose, 9.8 ft delivery hose and intake filter.

DP3 Deck washing pump kit - 43.5 psi

Complete kits including an automatic self-priming electric pump equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

VP45 Battery kit with 11.9 gpm vane pump

Self-priming electric vane pump with integrated by-pass valve. Aluminum body. Two options connection for 25 mm pipe. Rotor and vanes made of resin. Brush holder with EMI filter. Main applications: diesel and anti-freeze refuelling. Available also with case and handle for easy transport, On/ Off switch and battery clips.

UP12/A water pressure system PEEK gears 9.5 gpm

Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

UP1-JS impeller pump 7.4 gpm with integrated on/off switch

Professional range of self-priming electric 12V and 24V pumps. Ideal for bilge and waste water on any type of boat. ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

UP12/A-V20 water pressure system + 5.3 gal tank

Water pressure systems equipped with accumulator tank. Protected by an integrated fuse. The pumps can supply up to 5 faucets at the same time and are suitable for boats up to 60 feet. Extremely compact, they are easy to be installed in the engine compartment.

DP3/E deck washing pump + electronic control 43.5 psi

Complete kits including an electronic self-priming electric pump with electronic control. Equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

DP12 deck washing pump kit - 72.5 psi

Complete kit including an automatic self-priming electric pump equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

VP45/AC Vane pump 9.2 gpm

Self-priming vane pump for diesel refueling. 220V version. With integrated by-pass valve, aluminum body and flange, double possibility of connection. Heavy Duty.

DP9/E deck washing pump + electronic control 65.3 psi

Complete kits including an electronic self-priming electric pump with electronic control. Equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

UP2/E-BR bronze gear pump with electronic pressure sensor 2.6 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

DP9 deck washing pump kit - 58 psi

Complete kits including an automatic self-priming electric pump equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchablel hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

UP8/E electronic water pressure system 2.6 gpm

Self-priming automatic electric pump with helical PEEK, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

VP45A-S vane pump 11.9 gpm with on/off switch, brass fittings

VP45, in all its versions, is also available with brass hose fittings ¾ BSP for hose Ø 3/4".

UP12-PV PEEK gear pump 9.5 gpm with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

UP6/E-BR bronze gear pump with electronic pressure sensor + SCS 6.9 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP3/E-BR bronze gear pump with electr. pressure sensor + SCS 4 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP3/OIL-AC oil / diesel gear pump

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft.

UP12/E-BR bronze gear pump with electr. pressure sensor + SCS 9.5 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP12/E-LOBR electronic pump for oils, bronze gears + SCS

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.