Products : 25, 13, 32, 13-14 and 7

UP9/OIL (ex UP6/oil) gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

UP3 Bronze gear pump 15 l/min

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP3/E electronic water pressure system 15 l/min

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP1 pump rubber impeller 35 l/min

Self-priming electric water pumps with selflubricating flexible impeller for prolonged service life and better performance. Nickelplated brass body with stainless steel shaft.

UP3/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

UP10-HD heavy duty pump with flange, 7 bar, 18 l/min

Self-priming electric pumps for transferring of liquids up to 7 bar pressure. Pump body in nickel-plated brass. Main application: high pressure spraying.

UP9 Heavy duty pump 12 l/min

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP8 heavy duty pump 10 l/min

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP1-M pump, rubber impeller 45 l/min

Self-priming electric pump with selflubricating rubber impeller. Now available in 3 different flow rates: 25, 35 and 45 liters/minute. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.

UP9/E-BR bronze gear pump with electronic pressure sensor + SCS 12 l/min

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

M1 compressor

Air compressor for horns

UP9-XC heavy duty gear pump 12 l/min - s.s. AISI 316

Self-priming electric pumps for transferring of liquids up to 5 bar pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.

UP3-P PEEK gear pump 15 l/min

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.

UP3/OIL-R revers. pump lubricating oil + integr.on/off switch

Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

UP8-XC heavy duty gear pump 10 l/min - s.s. AISI 316

Self-priming electric pumps for transferring of liquids up to 4 bar pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.

UP8-P heavy duty pump, PEEK gears, 10 l/min

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.

UP9-P heavy duty gear pump 12 l/min - PEEK gears - FKM O-Ring

Self-priming electric pumps for transferring of liquids up to 5 bar pressure. Pump body in nickel-plated brass. Main application: high pressure spraying.

UP2000 submersible pump 126 l/min

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

UP3/AC gear pump

Self-priming electric pump for transferring diesel and viscous liquids. Brass gears, pump body and connections in nickel-plated brass, shaft in stainless steel. Seal in FKM and O-ring in NBR.

OCK1-R Oil change Kit with integrated reversible switch

Compact size oil change kit. Easy to operate and carry. Complete with bronze gears pump, clips, fuse, hoses and accessories for transfer operations. Available also with electronic control panel and 12/24V universal voltage.

UP8-RE reversible electronic pump 10 l/min with flow regulation

Heavy duty Electronic Gear pump 10 l/min and 3,5 bar. Integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate; the flow rate is also automatically adjusted according to the viscosity of the fluid to avoid cavitation. Best for oil and diesel transferring. Compact and Easy to operate and carry.

UPX gear pump 15 l/min - s.s. AISI 316 L

Self-priming electric pumps for transferring liquids for the food industry. Pump body and connections in stainless steel. O-Rings made of Silicone.

VP45-N vane pump 45 l/min

Self-priming electric vane pump with integrated by-pass valve. Aluminum body. Two options connection for 25 mm hose. Rotor and vanes made of resin. Brush holder with EMI filter. Main applications: diesel, oil and anti-freeze refuelling. Available also with case and handle for easy transport, On/Off switch and battery clips.

UP10/E electronic water pressure system 18 l/min

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits, campers.

UP9-XA heavy duty gear pump with flange 12 l/min - s.s. AISI 316

Self-priming electric pumps for transferring of liquids up to 5 bar pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.

UP1-B ballast pump with rubber impeller 45 l/min

Self-priming electric water pumps with selflubricating flexible impeller for prolonged service life and better performance. Nickelplated brass body with stainless steel shaft.

UP8/E-BR bronze gear pump with electr. pressure sensor + SCS 10 l/min

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seals and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP9/E electronic water pressure system 12 l/min

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits, campers.

UPX/AC gear pump 10 l/min - s.s. AISI 316

Self-priming electric pumps, 230V, for transferring liquids for the food industry. Pump body and connections in stainless steel. O-rings of Silicone.

UP3/A water pressure system 15 l/min

Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

UP10-XA pump for weed killers 18 l/min - s.s. AISI 316

Self-priming electric pumps for transferring of liquids up to 7 bar pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.

UP3-R gear pump 15 l/min with integr. reversible switch

Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, light oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

UP10-P heavy duty pump 18 l/min - PEEK gears - FKM O-Rings

Self-priming electric pumps for transferring of liquids up to 7 bar pressure. Pump body in nickel-plated brass. Main application: high pressure spraying.

UP10 heavy duty pump 18 l/min

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

OCK1 oil change Kit

Compact size oil change kit. Easy to operate and carry. Reversible: draws and fills oil. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. Available also with electronic control panel and 12/24V universal voltage.

UP9-HD heavy duty pump with flange 12 l/min

Self-priming electric pumps for transferring of liquids. Pump body in nickel-plated brass. Main application: high pressure spraying.

UP14/E-DX electronic dual pump system + PCS 92 l/min

Self-priming water pressure systems with two connected pumps with electronic control Speed motor related to the flow rate. Delayed start of the auxiliary pump. Reduced consumption and noise. Accumulator tank is not required. Protected against overloads. Pump functions monitored by 2 led. “Empty tank” signal and shut-off device.

DP12/E deck washing pump + electronic control 6 bar

Complete kits including an electronic self-priming electric pump with electronic control. Equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable coil hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

UPX-C chem pump 15 l/min - s.s. AISI 316

Self-priming electric pumps for transferring of chemical liquids. Pump body and connections in stainless steel. Seal and O-rings made of FKM.

UPX-C/AC chem pump 10 l/min s.s. AISI 316

Self-priming electric pump, 230V, for transferring of chemical liquids. Pump body and connections in stainless steel. Seal and O-rings in FKM.

UP3-S gear pump 15 l/min with integrated on/off switch

Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

UP66/E-DX electronic water pressure dual pump system 62 l/min

Self-priming water pressure systems with two connected pumps with electronic control Speed motor related to the flow rate. Reduced consumption and noise. Accumulator tank is not required. Protected against overloads. Pump functions monitored by 2 led. “Empty tank” signal and shut-off device.

IS14 In-line filter 3/8"

Transparent in-line filter with AISI 304 stainless steel net. Snap-on locking for easy inspection and cleaning.

DQC Deck quick connection for washing pumps

Quick connection for washing pump, integrated in a built-in white container with cover and gasket. Particulary easy to install and suitable for fast washing operations thanks to the quick-click connector for the gun coil hose.

OCK1-E Reversible oil/diesel transfer kit

Compact size oil change kit. Easy to operate and carry. Reversible: draws and fills oil. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. Available also with electronic control panel and 12/24V universal voltage.

UP12/E-DX electronic dual pump system 72 l/min

Self-priming water pressure systems with two connected pumps with electronic control Speed motor related to the flow rate. Delayed start of the auxiliary pump. Reduced consumption and noise. Accumulator tank is not required. Protected against overloads. Pump functions monitored by 2 led. “Empty tank” signal and shut-off device. Available also with control panel.

UP1/AC 230V 50 Hz pump rubber impeller 30 l/min

Self-priming electric pump for transfer of fresh or salt water with flexible impeller of nitrile rubber which allows the problem-free transit of small particles. Nickel-plated brass body, shaft in stainless steel. Electric motor 0,55 kW.

VP45-S vane pump 45 l/min with integrated on/off switch

Professional range of self-priming electric 12 V and 24 V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap.

VP45-K refuelling kit with 45 l/min vane pump

Kit for diesel refueling. Includes the vane pump with integrated by-pass valve and battery clips. Refueling gun, 2 m priming hose, 3 m delivery hose and intake filter.

UP3-CK portable gear pump kit 15 l/min

Self-priming electric pump with bronze gears for diesel transfer. Featuring a new case with handle for improved protection and easy transport. Completed by On/Off switch, cable with integrated fuse and battery clips.

DP3 Deck washing pump kit - 3 bar

Complete kits including an automatic self-priming electric pump equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

VP45 Battery kit with 45 l/min vane pump

Self-priming electric vane pump with integrated by-pass valve. Aluminum body. Two options connection for 25 mm pipe. Rotor and vanes made of resin. Brush holder with EMI filter. Main applications: diesel, oil and anti-freeze refuelling. Available also with case and handle for easy transport, On/ Off switch and battery clips.

UP3-RK reversible pump kit with panel 15 l/min

Diesel transfer Kit with electronic control. During priming the speed of the pump increases and the system automatically shuts off in case of empty tank and short circuit. Being equipped with a reverse-flow function system, this kit is particularly indicated for tank balancing operations on board.

UP3-PV PEEK gear pump 15 l/min with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

DP3/E deck washing pump + electronic control 3 bar

Complete kits including an electronic self-priming electric pump with electronic control. Equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

DP12 deck washing pump kit - 5 bar

Complete kit including an automatic self-priming electric pump equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

VP45/AC Vane pump 35 l/min

Self-priming vane pump for diesel refueling. 220V version. With integrated by-pass valve, aluminum body and flange, double possibility of connection. Heavy Duty.

DP9/E deck washing pump + electronic control 4,5 bar

Complete kits including an electronic self-priming electric pump with electronic control. Equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

OCK8-E Reversible electronic oil change kit 10 l/min with flow regulation

Electronic oil change kit 10 l/min with integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate. The flow rate is also automatically adjusted according to the viscosity of the fluid to avoid cavitation. Best for oil and diesel transferring. Compact and Easy to operate and carry. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. NOW AVAILABLE !

UP10-XC heavy duty pump 18 l/min - AISI 316 L

Self-priming electric pumps for transferring of liquids up to 7 bar pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.

DP9 deck washing pump kit - 4 bar

Complete kits including an automatic self-priming electric pump equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

UP9/A heavy duty water pressure system 12 l/min

Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

UP8/E electronic water pressure system 10 l/min

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

BF25 bottom filter and hosefittings for tubing ø 25 mm

UP9-MS/P Pump with Mechanical Seal EPDM, PEEK gears 12 l/min

Self-priming electric pumps with compact mechanical seal and helical gears in PEEK. The motor shaft is made of AISI316, with a nickel-plated brass body. The enhanced motor is designed for continuous operation under pressure.

UP10-MS/XC Stainless Steel Pump with Mechanical Seal 18 l/min

Self-priming electric pumps for liquid transfer or spraying. Stainless steel body and fittings, mechanical seal with EPDM or FKM rubber parts and PEEK gears.

UP10/E-BR bronze gear pump with electronic pressure sensor + SCS 18 l/min

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP10-MS/P Pump with Mechanical Seal, PEEK gears 18 l/min

Self-priming electric pumps with compact mechanical seal and helical gears in PEEK. The drive shaft is made of AISI316, with a nickel-plated brass body. The enhanced motor is designed for continuous use under pressure.

UP3/E-BR bronze gear pump with electronic pressure sensor + SCS 15 l/min

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seals and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP3/OIL-AC oil / diesel gear pump 5 l/min

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft.

UP9-MS/XC Stainless Steel Pump with Mechanical Seal EPDM 12 l/min

Self-priming electric pumps for liquid transfer or spraying. Stainless steel body and fittings, mechanical seal with EPDM or FKM rubber parts and PEEK gears.