Products : 228, 180, 400, 310, 410/490, 370, 320, 570, 300, 170/205, 500/400, 1850 and 368

CTA1 trumpet for hand horn TA1

Trumpet for gas horns , snap-on type

JE/120 black plastic horn, internal mounting

Compressed air horn complete with electric valve. Installation in engine compartment.

TA1-H hand horn, snap-on, HFO 200 ml

Hand held gas horn, snap-on type, complete with aluminium bottle Environmentally safe non-inflammable gas (HFO 1234ze) 200 ml. In accordance with European Directive No.517 / 2014. The color of the bottle may be different

TA1 hand horn, snap-on, inflammable, 200 ml

Hand held gas horn, snap-on type, complete with aluminium bottle. Environmentally safe inflammable gas 200 ml

TM80/N set of horns 2 pins

Set of electromagnetic horns, Ø 80 mm, twin pole, complete with relay and mounting hardware.

SMILE Built-in horn with white grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in white ASA, UV resistant. Grille in white or chromed ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

SHARK Single horn, white plastic, blister

Electromagnetic horn for small boats. High impact casing in chromed or white ASA and mounting bracket in AISI 304 stainless steel for easy installation. Very powerful sound and streamlined design. Excellent drainage system.

EM2 Stainless steel horn, short

Single electromagnetic horn with stainless steel trumpet. Powerful acoustic unit carefully protected and manufactured of non-corrosive materials, complete with fixing hardware.

TM80/L single Horn 2 pins low tone

Electromagnetic single horn, Ø 80 mm, twin pole. Low sound.

DUCK Stainless steel horn 25 cm

Compact electromagnetic horn with stainless steel trumpet, base and membrane. Integrated cable.

TCE Mini electric horn - white brass

Electromagnetic horn with reduced dimensions but with high sound output. Body made of white enamel brass and stainless steel, white brass trumpet.

BK2 back-up alarm 100 dB

Universal voltage waterproof horn with intermittent sound, particularly suitable for signalling operations such as: opening of deck and engine compartment; pulling out of gangways; crane, davit and cathead operating; malfunctioning of electronic devices.

HURRICANE TRUCK compact horn with integrated compressor

Single sound electropneumatic horn. The integrated compressor enables immediate sound output when pressing the push button. No air hosing is therefore required. Powerful sound. Easy installation with single fixing point.

SMILE built-in horn with chromed grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in white ASA, UV resistant. Grille in chromed ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

TA1R portable gas horn, s.s. diaphrame

Gas horn complete with plastic trumpet with stainless steel base and bottle containing non-inflammable gas.

MT2 set of chromed horns

Single or double electromagnetic horn. Acoustic unit carefully protected and manufactured of non-corrosive materials. Entirely chrome plated, complete with fixing hardware.

EM1 Stainless steel horn, long

Single electromagnetic horn with stainless steel trumpet. Powerful acoustic unit carefully protected and manufactured of non-corrosive materials, complete with fixing hardware.

SHARK Single horn, chromed , blister

Electromagnetic horn for small boats. High impact casing in chromed or white ASA and mounting bracket in AISI 304 stainless steel for easy installation. Very powerful sound and streamlined design. Excellent drainage system.

HURRICANE Built-in air horn with chromed grill

Enclosure type electropneumatic horn for boats. A great innovation is the integrated compressor with horn, enabling immediate sound output when pressing the push button. No air hosing is therefore required. ASA grille and steel bracket. Typically marine low tone and extraordinary powerful sound. Rapid enclosure type installation. Suitable for commercial boats, ferries, yachts under 12 meters, sea dredges and rubber dinghies.

HURRICANE Built-in air horn with grill

Enclosure type electropneumatic horn for boats. A great innovation is the integrated compressor with horn, enabling immediate sound output when pressing the push button. No air hosing is therefore required. ASA grille and steel bracket. Typically marine low tone and extraordinary powerful sound. Rapid enclosure type installation. Suitable for commercial boats, ferries, yachts under 12 meters, sea dredges and rubber dinghies.

MGT set of stainless steel horns + chromed shields

Compressed air horn for external mounting. Powerful sound. Stainless steel trumpet, complete with fixing hardware and front covers. Available with or without 24 V electric valve. Fits Mercedes ACTROS trucks.

MA1-S Single brass chromed horn

Single air horn for boats, entirely manufactured of non-corrosive materials. High quality chromed brass trumpet, complete with compressor, fixing hardware and relay.

JE/DB black plastic horn, 2 alternating notes

New compact compressed air horn with alternating sound. Complete with electric valves and electronic alternating device approx. 300 cycles per minute, with option of combined sound. Black plastic trumpets. Installation in engine compartment.

SMILE Built-in horn with black grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in black ASA, UV resistant. Grille in black ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

P1/LS brass chromed horn, external mounting

Compressed air horn for external mounting. Brass chromed trumpet, complete with fixing hardware excluding control valves. Available in two lengths: 500 and 590 mm.

TA1X portable gas horn s.s. diaph., HFO 200 ml

Gas horn, complete with plastic trumpet with stainless steel bottom plate and 200 ml bottle containing environmentally safe non-inflammable gas (HFO 1234ze). In accordance with European Directive No.517 / 2014. The color of the bottle may be different.

P1/S brass chromed horn, external mounting

Compressed air horn for external mounting. Brass chromed trumpet, complete with fixing hardware excluding control valves. Available in two lengths: 500 and 590 mm.

TP1 Chromed metal single horn + electric valve

Compressed air horn with metal chromed trumpet. Installation in engine compartment. Complete with fixing hardware and electric valve.

HT1/W compact horn with integrated compressor White Edition

Single sound electropneumatic horn. The integrated compressor enables immediate sound output when pressing the push button. No air hosing is therefore required. Powerful sound. Easy installation with single fixing point. The winter edition has better resistance to cold environments and salt presence, such as on roads during the winter.

HURRICANE TRUCK compact chromed horn with integrated compressor

Single sound electropneumatic horn. The integrated compressor enables immediate sound output when pressing the push button. No air hosing is therefore required. Powerful sound. Easy installation with single fixing point.

TP1/B Single horn black painted metal + electric valve

Compressed air horn with metal painted trumpet. Installation in engine compartment. Complete with fixing hardware and electric valve.