Products : 335, 315, 170, 175, 400, 570, 326, 440, 338/422, 328/368/412, 600/735, 950 / 1850, 1850, 320/300, 368 and 698

P1/2-E electronic horn 3 alternating notes

Compressed air horn with three alternating notes and possibility of combined sound. Available also with two different sounds on request, complete with electric valves and electronic alternating device. Metal chromed trumpets. Installation in engine compartment.

PW2 whistle 12/20 m, ø200 mm with compressor

Approved signalling whistle complete with chromed or white horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

CTA1 trumpet for hand horn TA1

Trumpet for gas horns , snap-on type

JE/120 black plastic horn, internal mounting

Compressed air horn complete with electric valve. Installation in engine compartment.

KS2 Metal chromed horn, external mounting

Twin tone horn for compressed air with metal chromed trumpets. External mounting, complete with fixing hardware, excluding control valves.

TA1-H hand horn, snap-on, HFO 200 ml

Hand held gas horn, snap-on type, complete with aluminium bottle Environmentally safe non-inflammable gas (HFO 1234ze) 200 ml. In accordance with European Directive No.517 / 2014. The color of the bottle may be different

K2 Horn, 2 alternating notes, chromed metal

Twin air horn with alternating sound, like bus, complete with electric compressor, relay, tubing and fixing hardware. Metal chromed trumpets.

EW3-M electronic whistle 20/75m + ampli + fog signal

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

TA1 hand horn, snap-on, inflammable, 200 ml

Hand held gas horn, snap-on type, complete with aluminium bottle. Environmentally safe inflammable gas 200 ml

PW3 whistle 20/75 m, ø300 mm + Electric valve

Approved whistle complete with chromed or white horn Ø 300 mm. Electric valve and mounting accessories, for compressed air operation 6/12 bar. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

EW3 electronic whistle 20/75 m + fog signal

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

SMILE Built-in horn with white grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in white ASA, UV resistant. Grille in white or chromed ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

SHARK Single horn, white plastic, blister

Electromagnetic horn for small boats. High impact casing in chromed or white ASA and mounting bracket in AISI 304 stainless steel for easy installation. Very powerful sound and streamlined design. Excellent drainage system.

P2/3-E Electronic horn 3 alternating notes

Compressed air horn with three sound in two sequences. Complete with electric valves and electronic alternating device. Metal chromed trumpets. Installation in engine compartment.

BK1 back-up alarm 85-95 dB

Universal voltage waterproof horn with intermittent sound, particularly suitable for signalling operations such as: opening of deck and engine compartment; pulling out of gangways; crane, davit and cathead operating; malfunctioning of electronic devices.

TM80/L single Horn 2 pins low tone

Electromagnetic single horn, Ø 80 mm, twin pole. Low sound.

DUCK Stainless steel horn 25 cm

Compact electromagnetic horn with stainless steel trumpet, base and membrane. Integrated cable.

PW2-BC Chromed whistle 12/20 m, ø200 mm with compressor

Approved signalling whistle complete with chromed or white horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

XB2/B 12V Black electropneumatic air horn with double compressor

Very powerful electric air horn with deep and loud sound. Xtreme Blast is the most powerful two tones horn of its category. The use of two electric compressors, in fact, always ensures a proper level of sound pressure for each of the two acoustic trumpets. Highly versatile and compact, it can be easily installed on any type of vehicle. The horn is composed of two heavy duty compressors and a high resistance nylon base with two black painted metal trumpets. It is supplied with relay, air hoses and fixing hardware.

XB2 Electric air horn with double compressor

Very powerful electric air horn with deep and loud sound. Xtreme Blast is the most powerful two tones horn of its category. The use of two electric compressors, in fact, always ensures a proper level of sound pressure for each of the two acoustic trumpets. Highly versatile and compact, it can be easily installed on any type of vehicle. The horn is composed of two heavy duty compressors and a high resistance nylon base with two chromed metal trumpets. It is supplied with relay, air hoses and fixing hardware.

K3/4 Horn, 3 alternating notes, chromed metal

Air horn complete with electric compressor, three tones sounding in succession or in tune. Metal chromed trumpets, complete with relay, tubing and fixing hardware.

TCE Mini electric horn - white brass

Electromagnetic horn with reduced dimensions but with high sound output. Body made of white enamel brass and stainless steel, white brass trumpet.

EW3-MS electronic whistle 20/75 m + fog signal + mic.+ siren

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

PW3-BC chromed whistle 20/75 m, ø300 mm + electric valve

Approved whistle complete with chromed or white horn Ø300 mm. Electric valve and mounting accessories, for compressed air operation 6/12 bar. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

BK2 back-up alarm 100 dB

Universal voltage waterproof horn with intermittent sound, particularly suitable for signalling operations such as: opening of deck and engine compartment; pulling out of gangways; crane, davit and cathead operating; malfunctioning of electronic devices.

MGT/L stainless steel horn + chromed shield

Compressed air horn for external mounting. Powerful sound. Stainless steel trumpet, complete with fixing hardware and front covers. Available with or without 24 V electric valve. Fits Mercedes ACTROS trucks.

SMILE built-in horn with chromed grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in white ASA, UV resistant. Grille in chromed ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

MGT/H stainless steel horn + chromed front cover

Compressed air horn for external mounting. Powerful sound. Stainless steel trumpet, complete with fixing hardware and front covers. Available with or without 24 V electric valve. Fits Mercedes ACTROS trucks.

TA1R portable gas horn, s.s. diaphrame

Gas horn complete with plastic trumpet with stainless steel base and bottle containing non-inflammable gas.

MA1-C Single plastic chromed horn

Single air horn for boats, entirely manufactured of non-corrosive materials. Plastic chromed trumpet, complete with compressor, fixing hardware and relay.

90/1-L ø90 disc horn low tone

Electromagnetic disc horn, Ø90 mm, twin pole, high (-H) or low (-L) tone, complete with mounting hardware.

PW3-BB white whistle 20/75 m, ø300 mm + Electric valve

Approved whistle complete with chromed or white horn Ø300 mm. Electric valve and mounting accessories, for compressed air operation 6/12 bar. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD’S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

SHARK Single horn, chromed , blister

Electromagnetic horn for small boats. High impact casing in chromed or white ASA and mounting bracket in AISI 304 stainless steel for easy installation. Very powerful sound and streamlined design. Excellent drainage system.

PW2-BB White whistle 12/20 m, ø200 mm with compressor

Approved signalling whistle complete with chromed or white horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

A2/R twin plastic horns

Air horn complete with electric compressor, combined sound. Two plastic trumpets, complete with relay, tubing and fixing hardware.

SMILE Built-in horn with black grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in black ASA, UV resistant. Grille in black ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

TA1X portable gas horn s.s. diaph., HFO 200 ml

Gas horn, complete with plastic trumpet with stainless steel bottom plate and 200 ml bottle containing environmentally safe non-inflammable gas (HFO 1234ze). In accordance with European Directive No.517 / 2014. The color of the bottle may be different.

TP1 Chromed metal single horn + electric valve