Products : 335, 3200, 315, 190, 220, 400, 410, 600/735/785, 310, 490, 370, 320, 800, 500, 338/422, 330/370, 186/234, 320/300, 368 and 2350

PW2 whistle 12/20 m, ø200 mm with compressor

Approved signalling whistle complete with chromed or white horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

CTA1 trumpet for hand horn TA1

Trumpet for gas horns , snap-on type

JE/120 black plastic horn, internal mounting

Compressed air horn complete with electric valve. Installation in engine compartment.

KS2 Metal chromed horn, external mounting

Twin tone horn for compressed air with metal chromed trumpets. External mounting, complete with fixing hardware, excluding control valves.

TA1-H hand horn, snap-on, HFO 200 ml

Hand held gas horn, snap-on type, complete with aluminium bottle Environmentally safe non-inflammable gas (HFO 1234ze) 200 ml. In accordance with European Directive No.517 / 2014. The color of the bottle may be different

K2 Horn, 2 alternating notes, chromed metal

Twin air horn with alternating sound, like bus, complete with electric compressor, relay, tubing and fixing hardware. Metal chromed trumpets.

TA1 hand horn, snap-on, inflammable, 200 ml

Hand held gas horn, snap-on type, complete with aluminium bottle. Environmentally safe inflammable gas 200 ml

PW3 whistle 20/75 m, ø300 mm + Electric valve

Approved whistle complete with chromed or white horn Ø 300 mm. Electric valve and mounting accessories, for compressed air operation 6/12 bar. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

BK3 back-up alarm, continuous sound, 105 dB

Universal voltage waterproof horn with continuous sound, particularly suitable for signalling operations such as: opening of deck and engine compartment; pulling out of gangways; crane, davit and cathead operating; malfunctioning of electronic devices.

TP2 metal chromed horn, internal mounting

Twin tone horn for compressed air with metal chromed trumpets for installation in engine compartment, complete with fixing hardware, excluding control valves.

SMILE Built-in horn with white grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in white ASA, UV resistant. Grille in white or chromed ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

SHARK Single horn, white plastic, blister

Electromagnetic horn for small boats. High impact casing in chromed or white ASA and mounting bracket in AISI 304 stainless steel for easy installation. Very powerful sound and streamlined design. Excellent drainage system.

EM2 Stainless steel horn, short

Single electromagnetic horn with stainless steel trumpet. Powerful acoustic unit carefully protected and manufactured of non-corrosive materials, complete with fixing hardware.

F3/R horn 3 alternating notes, plastic

Air horn complete with electric compressor, combined or alternating sound. Three plastic trumpets, complete with relay, tubing and fixing hardware.

TM80/L single Horn 2 pins low tone

Electromagnetic single horn, Ø 80 mm, twin pole. Low sound.

EMH-2 Elec.whistle with 2 loudspeakers + mike + siren

Waterproof electronic whistle complete with two loudspeakers, AISI 316 stainless steel bracket and electronic unit with microphone.

MT1-H chromed horn, high tone

Single or double electromagnetic horn. Acoustic unit carefully protected and manufactured of non-corrosive materials. Entirely chrome plated, complete with fixing hardware.

PW2-BC Chromed whistle 12/20 m, ø200 mm with compressor

Approved signalling whistle complete with chromed or white horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

GT51 brass chromed horn, 68 cm long

Compressed air horn for external mounting. Powerful sound. Brass chromed trumpet, complete with fixing hardware, excluding control valves. Available in three lengths: 750 mm - 680 mm - 600 mm.

XB2/B 12V Black electropneumatic air horn with double compressor

Very powerful electric air horn with deep and loud sound. Xtreme Blast is the most powerful two tones horn of its category. The use of two electric compressors, in fact, always ensures a proper level of sound pressure for each of the two acoustic trumpets. Highly versatile and compact, it can be easily installed on any type of vehicle. The horn is composed of two heavy duty compressors and a high resistance nylon base with two black painted metal trumpets. It is supplied with relay, air hoses and fixing hardware.

XB2 Electric air horn with double compressor

Very powerful electric air horn with deep and loud sound. Xtreme Blast is the most powerful two tones horn of its category. The use of two electric compressors, in fact, always ensures a proper level of sound pressure for each of the two acoustic trumpets. Highly versatile and compact, it can be easily installed on any type of vehicle. The horn is composed of two heavy duty compressors and a high resistance nylon base with two chromed metal trumpets. It is supplied with relay, air hoses and fixing hardware.

PW3-BC chromed whistle 20/75 m, ø300 mm + electric valve

Approved whistle complete with chromed or white horn Ø300 mm. Electric valve and mounting accessories, for compressed air operation 6/12 bar. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

HURRICANE TRUCK compact horn with integrated compressor

Single sound electropneumatic horn. The integrated compressor enables immediate sound output when pressing the push button. No air hosing is therefore required. Powerful sound. Easy installation with single fixing point.

EMH-M Electronic whistle + mike

Waterproof electronic whistle complete with loudspeaker, AISI 316 stainless steel bracket and electronic unit with microphone.

EMH-MS Electronic whistle + mike + siren

Waterproof electronic whistle complete with loudspeaker, AISI 316 stainless steel bracket and electronic unit with microphone.

MT1-L chromed horn, low tone

Single or double electromagnetic horn. Acoustic unit carefully protected and manufactured of non-corrosive materials. Entirely chrome plated, complete with fixing hardware.

SMILE built-in horn with chromed grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in white ASA, UV resistant. Grille in chromed ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

TM80/H single Horn 2 pins high tone

Electromagnetic single horn, Ø 80 mm, twin pole. High sound.

TA1R portable gas horn, s.s. diaphrame

Gas horn complete with plastic trumpet with stainless steel base and bottle containing non-inflammable gas.

EM1 Stainless steel horn, long

Single electromagnetic horn with stainless steel trumpet. Powerful acoustic unit carefully protected and manufactured of non-corrosive materials, complete with fixing hardware.

90/1-L ø90 disc horn low tone

Electromagnetic disc horn, Ø90 mm, twin pole, high (-H) or low (-L) tone, complete with mounting hardware.

PW3-BB white whistle 20/75 m, ø300 mm + Electric valve

Approved whistle complete with chromed or white horn Ø300 mm. Electric valve and mounting accessories, for compressed air operation 6/12 bar. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD’S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

SHARK Single horn, chromed , blister

Electromagnetic horn for small boats. High impact casing in chromed or white ASA and mounting bracket in AISI 304 stainless steel for easy installation. Very powerful sound and streamlined design. Excellent drainage system.

RIT Brass chromed horn, external mounting

Twin tone horn for compressed air with brass chromed trumpets. For external mounting, complete with fixing hardware, excluding control valves.

TP2/130 metal chromed horn+ electric valve

Twin tone horn for compressed air with metal chromed trumpets for installation in engine compartment, complete with fixing hardware and electric valve.

PW2-BB White whistle 12/20 m, ø200 mm with compressor

Approved signalling whistle complete with chromed or white horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

SMILE Built-in horn with black grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in black ASA, UV resistant. Grille in black ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

TA1X portable gas horn s.s. diaph., HFO 200 ml

Gas horn, complete with plastic trumpet with stainless steel bottom plate and 200 ml bottle containing environmentally safe non-inflammable gas (HFO 1234ze). In accordance with European Directive No.517 / 2014. The color of the bottle may be different.

TP1 Chromed metal single horn + electric valve

Compressed air horn with metal chromed trumpet. Installation in engine compartment. Complete with fixing hardware and electric valve.

HT1/W compact horn with integrated compressor White Edition

Single sound electropneumatic horn. The integrated compressor enables immediate sound output when pressing the push button. No air hosing is therefore required. Powerful sound. Easy installation with single fixing point. The winter edition has better resistance to cold environments and salt presence, such as on roads during the winter.

EMH Electronic whistle with VHF, fog sign.