Products : 420, 228, 170, 400, 410, 600/735/785, 378/422, 490, 570, 300, 500, 338/422, 330/370, 1850, 370/320 and 698

CTA1 trumpet for hand horn TA1

Trumpet for gas horns , snap-on type

JE/120 black plastic horn, internal mounting

Compressed air horn complete with electric valve. Installation in engine compartment.

TA1-H hand horn, snap-on, HFO 200 ml

Hand held gas horn, snap-on type, complete with aluminium bottle Environmentally safe non-inflammable gas (HFO 1234ze) 200 ml. In accordance with European Directive No.517 / 2014. The color of the bottle may be different

TT2 Horn, metal chromed, external mounting

Twin air horn for external mounting, complete with electric compressor, relay and fixing hardware. Metal chromed trumpets, particularly suitable for installation on vans, campers, pick-ups, offroad vehicles, etc.

K2 Horn, 2 alternating notes, chromed metal

Twin air horn with alternating sound, like bus, complete with electric compressor, relay, tubing and fixing hardware. Metal chromed trumpets.

EW3-M electronic whistle 20/75m + ampli + fog signal

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

TA1 hand horn, snap-on, inflammable, 200 ml

Hand held gas horn, snap-on type, complete with aluminium bottle. Environmentally safe inflammable gas 200 ml

TP2 metal chromed horn, internal mounting

Twin tone horn for compressed air with metal chromed trumpets for installation in engine compartment, complete with fixing hardware, excluding control valves.

EW3 electronic whistle 20/75 m + fog signal

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

SMILE Built-in horn with white grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in white ASA, UV resistant. Grille in white or chromed ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

SHARK Single horn, white plastic, blister

Electromagnetic horn for small boats. High impact casing in chromed or white ASA and mounting bracket in AISI 304 stainless steel for easy installation. Very powerful sound and streamlined design. Excellent drainage system.

F3/R horn 3 alternating notes, plastic

Air horn complete with electric compressor, combined or alternating sound. Three plastic trumpets, complete with relay, tubing and fixing hardware.

EM1/2 Set stainless steel trumpets

Single electromagnetic horn with stainless steel trumpet. Powerful acoustic unit carefully protected and manufactured of non-corrosive materials, complete with fixing hardware.

TM80/L single Horn 2 pins low tone

Electromagnetic single horn, Ø 80 mm, twin pole. Low sound.

MT1-H chromed horn, high tone

Single or double electromagnetic horn. Acoustic unit carefully protected and manufactured of non-corrosive materials. Entirely chrome plated, complete with fixing hardware.

DUCK Stainless steel horn 25 cm

Compact electromagnetic horn with stainless steel trumpet, base and membrane. Integrated cable.

XB2/B 12V Black electropneumatic air horn with double compressor

Very powerful electric air horn with deep and loud sound. Xtreme Blast is the most powerful two tones horn of its category. The use of two electric compressors, in fact, always ensures a proper level of sound pressure for each of the two acoustic trumpets. Highly versatile and compact, it can be easily installed on any type of vehicle. The horn is composed of two heavy duty compressors and a high resistance nylon base with two black painted metal trumpets. It is supplied with relay, air hoses and fixing hardware.

XB2 Electric air horn with double compressor

Very powerful electric air horn with deep and loud sound. Xtreme Blast is the most powerful two tones horn of its category. The use of two electric compressors, in fact, always ensures a proper level of sound pressure for each of the two acoustic trumpets. Highly versatile and compact, it can be easily installed on any type of vehicle. The horn is composed of two heavy duty compressors and a high resistance nylon base with two chromed metal trumpets. It is supplied with relay, air hoses and fixing hardware.

TCE Mini electric horn - white brass

Electromagnetic horn with reduced dimensions but with high sound output. Body made of white enamel brass and stainless steel, white brass trumpet.

EW3-MS electronic whistle 20/75 m + fog signal + mic.+ siren

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

BK2 back-up alarm 100 dB

Universal voltage waterproof horn with intermittent sound, particularly suitable for signalling operations such as: opening of deck and engine compartment; pulling out of gangways; crane, davit and cathead operating; malfunctioning of electronic devices.

MGT/L stainless steel horn + chromed shield

Compressed air horn for external mounting. Powerful sound. Stainless steel trumpet, complete with fixing hardware and front covers. Available with or without 24 V electric valve. Fits Mercedes ACTROS trucks.

MT1-L chromed horn, low tone

Single or double electromagnetic horn. Acoustic unit carefully protected and manufactured of non-corrosive materials. Entirely chrome plated, complete with fixing hardware.

SMILE built-in horn with chromed grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in white ASA, UV resistant. Grille in chromed ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

TM80/H single Horn 2 pins high tone

Electromagnetic single horn, Ø 80 mm, twin pole. High sound.

MGT/H stainless steel horn + chromed front cover

Compressed air horn for external mounting. Powerful sound. Stainless steel trumpet, complete with fixing hardware and front covers. Available with or without 24 V electric valve. Fits Mercedes ACTROS trucks.

TA1R portable gas horn, s.s. diaphrame

Gas horn complete with plastic trumpet with stainless steel base and bottle containing non-inflammable gas.

BZ1 electronic buzzer 420Hz

Electronic buzzer for fitment in vehicle interiors. Used as indicator for “lights on”, “fasten seat belts” etc.

SHARK Single horn, chromed , blister

Electromagnetic horn for small boats. High impact casing in chromed or white ASA and mounting bracket in AISI 304 stainless steel for easy installation. Very powerful sound and streamlined design. Excellent drainage system.

HURRICANE Built-in air horn with chromed grill

Enclosure type electropneumatic horn for boats. A great innovation is the integrated compressor with horn, enabling immediate sound output when pressing the push button. No air hosing is therefore required. ASA grille and steel bracket. Typically marine low tone and extraordinary powerful sound. Rapid enclosure type installation. Suitable for commercial boats, ferries, yachts under 12 meters, sea dredges and rubber dinghies.

TP2/130 metal chromed horn+ electric valve

Twin tone horn for compressed air with metal chromed trumpets for installation in engine compartment, complete with fixing hardware and electric valve.

HURRICANE Built-in air horn with grill

Enclosure type electropneumatic horn for boats. A great innovation is the integrated compressor with horn, enabling immediate sound output when pressing the push button. No air hosing is therefore required. ASA grille and steel bracket. Typically marine low tone and extraordinary powerful sound. Rapid enclosure type installation. Suitable for commercial boats, ferries, yachts under 12 meters, sea dredges and rubber dinghies.

MA1-S Single brass chromed horn

Single air horn for boats, entirely manufactured of non-corrosive materials. High quality chromed brass trumpet, complete with compressor, fixing hardware and relay.

TC1/P Mini horn - white ABS

Electropneumatic horn with reduced dimensions (total length 25 cm) but with high sound output, complete with electric compressor, tubing and mounting hardware.

SMILE Built-in horn with black grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in black ASA, UV resistant. Grille in black ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

TA1X portable gas horn s.s. diaph., HFO 200 ml

Gas horn, complete with plastic trumpet with stainless steel bottom plate and 200 ml bottle containing environmentally safe non-inflammable gas (HFO 1234ze). In accordance with European Directive No.517 / 2014. The color of the bottle may be different.

P1/S brass chromed horn, external mounting