Products : 420, 315, 180, 330, 210, 400, 484/676, 370, 570, 690, 328/368/412, 450, 4000, 698 and 380

P1/2-E electronic horn 3 alternating notes

Compressed air horn with three alternating notes and possibility of combined sound. Available also with two different sounds on request, complete with electric valves and electronic alternating device. Metal chromed trumpets. Installation in engine compartment.

PW2 whistle 12/20 m, ø200 mm with compressor

Approved signalling whistle complete with chromed or white horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

CTA1 trumpet for hand horn TA1

Trumpet for gas horns , snap-on type

JE/120 black plastic horn, internal mounting

Compressed air horn complete with electric valve. Installation in engine compartment.

TA1-H hand horn, snap-on, HFO 200 ml

Hand held gas horn, snap-on type, complete with aluminium bottle Environmentally safe non-inflammable gas (HFO 1234ze) 200 ml. In accordance with European Directive No.517 / 2014. The color of the bottle may be different

EW3-M electronic whistle 20/75m + ampli + fog signal

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

TA1 hand horn, snap-on, inflammable, 200 ml

Hand held gas horn, snap-on type, complete with aluminium bottle. Environmentally safe inflammable gas 200 ml

PW3 whistle 20/75 m, ø300 mm + Electric valve

Approved whistle complete with chromed or white horn Ø 300 mm. Electric valve and mounting accessories, for compressed air operation 6/12 bar. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

EW2 electronic whistle 12/20m + fog signal

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class IV international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

90/1-H ø90 disc horn high tone

Electromagnetic disc horn, Ø90 mm, twin pole, high (-H) or low (-L) tone, complete with mounting hardware.

EMX2 Horn, stainless steel short

Single or double electromagnetic horn with stainless steel trumpet , bracket and membrane. New support design with integrated cable. Complete with fixing hardware.

EW2-M electronic whistle 12/20 m+ ampli + fog signal

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class IV international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

EW3 electronic whistle 20/75 m + fog signal

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

SMILE Built-in horn with white grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in white ASA, UV resistant. Grille in white or chromed ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

SHARK Single horn, white plastic, blister

Electromagnetic horn for small boats. High impact casing in chromed or white ASA and mounting bracket in AISI 304 stainless steel for easy installation. Very powerful sound and streamlined design. Excellent drainage system.

EM2 Stainless steel horn, short

Single electromagnetic horn with stainless steel trumpet. Powerful acoustic unit carefully protected and manufactured of non-corrosive materials, complete with fixing hardware.

EW2-MS electr. whistle 12/20 m + fog signal + mic.+ siren

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class IV international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

P2/3-E Electronic horn 3 alternating notes

Compressed air horn with three sound in two sequences. Complete with electric valves and electronic alternating device. Metal chromed trumpets. Installation in engine compartment.

TM80/L single Horn 2 pins low tone

Electromagnetic single horn, Ø 80 mm, twin pole. Low sound.

DUCK Stainless steel horn 25 cm

Compact electromagnetic horn with stainless steel trumpet, base and membrane. Integrated cable.

PW2-BC Chromed whistle 12/20 m, ø200 mm with compressor

Approved signalling whistle complete with chromed or white horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

K3/4 Horn, 3 alternating notes, chromed metal

Air horn complete with electric compressor, three tones sounding in succession or in tune. Metal chromed trumpets, complete with relay, tubing and fixing hardware.

TCE Mini electric horn - white brass

Electromagnetic horn with reduced dimensions but with high sound output. Body made of white enamel brass and stainless steel, white brass trumpet.

EW3-MS electronic whistle 20/75 m + fog signal + mic.+ siren

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

PW3-BC chromed whistle 20/75 m, ø300 mm + electric valve

Approved whistle complete with chromed or white horn Ø300 mm. Electric valve and mounting accessories, for compressed air operation 6/12 bar. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

GT52 brass chromed horn, 60 cm long

Compressed air horn for external mounting. Powerful sound. Brass chromed trumpet, complete with fixing hardware, excluding control valves. Available in three lengths: 750 mm - 680 mm - 600 mm.

SMILE built-in horn with chromed grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in white ASA, UV resistant. Grille in chromed ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

TA1R portable gas horn, s.s. diaphrame

Gas horn complete with plastic trumpet with stainless steel base and bottle containing non-inflammable gas.

BK92 12/100V Back-up alarm 92 dB

Back-up alarm for vehicles. Universal voltage 12/100V.

PW3-BB white whistle 20/75 m, ø300 mm + Electric valve

Approved whistle complete with chromed or white horn Ø300 mm. Electric valve and mounting accessories, for compressed air operation 6/12 bar. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD’S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

BZ1 electronic buzzer 420Hz

Electronic buzzer for fitment in vehicle interiors. Used as indicator for “lights on”, “fasten seat belts” etc.

SHARK Single horn, chromed , blister

Electromagnetic horn for small boats. High impact casing in chromed or white ASA and mounting bracket in AISI 304 stainless steel for easy installation. Very powerful sound and streamlined design. Excellent drainage system.

EMX1 Horn, stainless steel long

Single or double electromagnetic horn with stainless steel trumpet , bracket and membrane. New support design with integrated cable. Complete with fixing hardware.

PW2-BB White whistle 12/20 m, ø200 mm with compressor

Approved signalling whistle complete with chromed or white horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

TC1/P Mini horn - white ABS

Electropneumatic horn with reduced dimensions (total length 25 cm) but with high sound output, complete with electric compressor, tubing and mounting hardware.

SMILE Built-in horn with black grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in black ASA, UV resistant. Grille in black ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

P1/LS brass chromed horn, external mounting

Compressed air horn for external mounting. Brass chromed trumpet, complete with fixing hardware excluding control valves. Available in two lengths: 500 and 590 mm.

TA1X portable gas horn s.s. diaph., HFO 200 ml

Gas horn, complete with plastic trumpet with stainless steel bottom plate and 200 ml bottle containing environmentally safe non-inflammable gas (HFO 1234ze). In accordance with European Directive No.517 / 2014. The color of the bottle may be different.