Products : 420, 335, 3200, 315, 330, 170, 175, 900, 692/756, 222, 410/490, 370, 326/412, 500/400, 520/660, 450 and 698

TORNADO Compact twin tone horn with integrated compressor

Two tuned sounds electropneumatic horn. The integrated compressor enables immediate sound output when pressing the push button. No air hosing is therefore required. Powerful sound. Easy installation with single fixing point.

PW2 whistle 12/20 m, ø200 mm with compressor

Approved signalling whistle complete with chromed or white horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

TORNADO SPLIT compact twin tone horn with separated compressor

Electropneumatic horn with two tuned sounds, very powerful. Improved protection of the compressor from external agents. Easy installation with multiple fixing possibilities. Supplied with relay, fixing accessories and pipe.

TORNADO compact chromed twin tone horn with compressor

Two tuned sounds electropneumatic horn. The integrated compressor enables immediate sound output when pressing the push button. No air hosing is therefore required. Powerful sound. Easy installation with single fixing point.

EW3-M electronic whistle 20/75m + ampli + fog signal

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

PW3 whistle 20/75 m, ø300 mm + Electric valve

Approved whistle complete with chromed or white horn Ø 300 mm. Electric valve and mounting accessories, for compressed air operation 6/12 bar. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

90/1-H ø90 disc horn high tone

Electromagnetic disc horn, Ø90 mm, twin pole, high (-H) or low (-L) tone, complete with mounting hardware.

TM80/N set of horns 2 pins

Set of electromagnetic horns, Ø 80 mm, twin pole, complete with relay and mounting hardware.

EW3 electronic whistle 20/75 m + fog signal

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

EM2 Stainless steel horn, short

Single electromagnetic horn with stainless steel trumpet. Powerful acoustic unit carefully protected and manufactured of non-corrosive materials, complete with fixing hardware.

CL2 twin metal chromed horns

Air horn complete with electric compressor, combined sound. Two metal chromed trumpets, complete with relay, tubing and fixing hardware.

PW2-BC Chromed whistle 12/20 m, ø200 mm with compressor

Approved signalling whistle complete with chromed or white horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

EW3-MS electronic whistle 20/75 m + fog signal + mic.+ siren

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

PW3-BC chromed whistle 20/75 m, ø300 mm + electric valve

Approved whistle complete with chromed or white horn Ø300 mm. Electric valve and mounting accessories, for compressed air operation 6/12 bar. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

MGT/L stainless steel horn + chromed shield

Compressed air horn for external mounting. Powerful sound. Stainless steel trumpet, complete with fixing hardware and front covers. Available with or without 24 V electric valve. Fits Mercedes ACTROS trucks.

TW1 train whistle

The original train whistle entirely manufactured in chromed brass, compressed air driven (min. 8 bar). Stainless steel fixing bracket. Includes 8 mm OD tube connections and excludes valves.

MGT/H stainless steel horn + chromed front cover

Compressed air horn for external mounting. Powerful sound. Stainless steel trumpet, complete with fixing hardware and front covers. Available with or without 24 V electric valve. Fits Mercedes ACTROS trucks.

MT2 set of chromed horns

Single or double electromagnetic horn. Acoustic unit carefully protected and manufactured of non-corrosive materials. Entirely chrome plated, complete with fixing hardware.

90/1-L ø90 disc horn low tone

Electromagnetic disc horn, Ø90 mm, twin pole, high (-H) or low (-L) tone, complete with mounting hardware.

PW3-BB white whistle 20/75 m, ø300 mm + Electric valve

Approved whistle complete with chromed or white horn Ø300 mm. Electric valve and mounting accessories, for compressed air operation 6/12 bar. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD’S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

BZ1 electronic buzzer 420Hz

Electronic buzzer for fitment in vehicle interiors. Used as indicator for “lights on”, “fasten seat belts” etc.

EMX1 Horn, stainless steel long

Single or double electromagnetic horn with stainless steel trumpet , bracket and membrane. New support design with integrated cable. Complete with fixing hardware.

TT2-M Twin plastic chromed horns

Twin tone air horn with plastic chromed trumpets, complete with electric compressor and fixing hardware.

K1/S Horn, brass chromed, external mounting

Single air horn for external mounting, complete with electric compressor, relay and fixing hardware. Brass chromed trumpet, particularly suitable for installation on vans, campers, pick-ups, off-road vehicles etc.

PW2-BB White whistle 12/20 m, ø200 mm with compressor

Approved signalling whistle complete with chromed or white horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

JE/DB black plastic horn, 2 alternating notes

New compact compressed air horn with alternating sound. Complete with electric valves and electronic alternating device approx. 300 cycles per minute, with option of combined sound. Black plastic trumpets. Installation in engine compartment.

TC1/P Mini horn - white ABS

Electropneumatic horn with reduced dimensions (total length 25 cm) but with high sound output, complete with electric compressor, tubing and mounting hardware.

P1 metal chromed horn, external mounting

Compressed air horn for external mounting. Metal chromed trumpet, complete with fixing hardware, excluding control valves.

TR2/W compact twin tone horn with integrated compressor, White Edition

Two tuned sounds electropneumatic horn. The integrated compressor enables immediate sound output when pressing the push button. No air hosing is therefore required. Powerful sound. Easy installation with single fixing point.

K1 Horn, metal chromed, external mounting

Single air horn for external mounting, complete with electric compressor, relay and fixing hardware. Metal chromed trumpet, particularly suitable for installation on vans, campers, pick-ups, off-road vehicles etc.

BZ2 electronic light warning buzzer, blister

Buzzer for fitment in vehicle interiors, complete with electronic card. Used as indicator for “lights on”. Starts on opening the door.

TR2/SW compact twin tone horn with separated compressor, White Edition

Electropneumatic horn with two tuned sounds, very powerful. Improved protection of the compressor from external agents. Easy installation with multiple fixing possibilities. Supplied with relay, fixing accessories and pipe.

BZ3 electronic cabin Buzzer 420 Hz - EMC

Cabin buzzer equipped with EMI filter. Normally used as signal in anomaly detection systems (SAS).

PW3-BN Black whistle 20/75 m, ø300 mm + Electric valve

Approved whistle complete with black horn Ø300 mm. Electric valve and mounting accessories, for compressed air operation 6/12 bar. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD’S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

PW2-BN Black whistle 12/20 m, ø200 mm with compressor

Approved signalling whistle complete with chromed or white horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.