Products : 430, 3200, 228, 180, 330, 210, 175, 400, 692/756, 222, 378/422, 370, 320, 326, 300, 800, 500, 440, 338/422, 500/400, 520/660 and 600/735

TORNADO Compact twin tone horn with integrated compressor

Two tuned sounds electropneumatic horn. The integrated compressor enables immediate sound output when pressing the push button. No air hosing is therefore required. Powerful sound. Easy installation with single fixing point.

90/1-E ø90 electronic disc horn

Electronic horn, ø90 mm, 2 or 3 pins type, extensively developed for OEM applications. High tone, guaranteed for 1.000.000 cycles. The internal contacts are replaced by a transistor. Low level of electromagnetic interference. Particularly suitable for forklifts and earth-moving machines.

70/1-H ø70 disc horn high tone

Electromagnetic horn, Ø70 mm, twin pole, high tone. Suitable for narrow spaces and for motorcycles.

CTA1 trumpet for hand horn TA1

Trumpet for gas horns , snap-on type

JE/120 black plastic horn, internal mounting

Compressed air horn complete with electric valve. Installation in engine compartment.

TA1-H hand horn, snap-on, HFO 200 ml

Hand held gas horn, snap-on type, complete with aluminium bottle Environmentally safe non-inflammable gas (HFO 1234ze) 200 ml. In accordance with European Directive No.517 / 2014. The color of the bottle may be different

TT2 Horn, metal chromed, external mounting

Twin air horn for external mounting, complete with electric compressor, relay and fixing hardware. Metal chromed trumpets, particularly suitable for installation on vans, campers, pick-ups, offroad vehicles, etc.

TORNADO SPLIT compact twin tone horn with separated compressor

Electropneumatic horn with two tuned sounds, very powerful. Improved protection of the compressor from external agents. Easy installation with multiple fixing possibilities. Supplied with relay, fixing accessories and pipe.

TORNADO compact chromed twin tone horn with compressor

Two tuned sounds electropneumatic horn. The integrated compressor enables immediate sound output when pressing the push button. No air hosing is therefore required. Powerful sound. Easy installation with single fixing point.

K2 Horn, 2 alternating notes, chromed metal

Twin air horn with alternating sound, like bus, complete with electric compressor, relay, tubing and fixing hardware. Metal chromed trumpets.

TA1 hand horn, snap-on, inflammable, 200 ml

Hand held gas horn, snap-on type, complete with aluminium bottle. Environmentally safe inflammable gas 200 ml

TM80/N set of horns 2 pins

Set of electromagnetic horns, Ø 80 mm, twin pole, complete with relay and mounting hardware.

SMILE Built-in horn with white grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in white ASA, UV resistant. Grille in white or chromed ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

SHARK Single horn, white plastic, blister

Electromagnetic horn for small boats. High impact casing in chromed or white ASA and mounting bracket in AISI 304 stainless steel for easy installation. Very powerful sound and streamlined design. Excellent drainage system.

EM2 Stainless steel horn, short

Single electromagnetic horn with stainless steel trumpet. Powerful acoustic unit carefully protected and manufactured of non-corrosive materials, complete with fixing hardware.

TM80/L single Horn 2 pins low tone

Electromagnetic single horn, Ø 80 mm, twin pole. Low sound.

EMH-2 Elec.whistle with 2 loudspeakers + mike + siren

Waterproof electronic whistle complete with two loudspeakers, AISI 316 stainless steel bracket and electronic unit with microphone.

CL2 twin metal chromed horns

Air horn complete with electric compressor, combined sound. Two metal chromed trumpets, complete with relay, tubing and fixing hardware.

XB2/B 12V Black electropneumatic air horn with double compressor

Very powerful electric air horn with deep and loud sound. Xtreme Blast is the most powerful two tones horn of its category. The use of two electric compressors, in fact, always ensures a proper level of sound pressure for each of the two acoustic trumpets. Highly versatile and compact, it can be easily installed on any type of vehicle. The horn is composed of two heavy duty compressors and a high resistance nylon base with two black painted metal trumpets. It is supplied with relay, air hoses and fixing hardware.

XB2 Electric air horn with double compressor

Very powerful electric air horn with deep and loud sound. Xtreme Blast is the most powerful two tones horn of its category. The use of two electric compressors, in fact, always ensures a proper level of sound pressure for each of the two acoustic trumpets. Highly versatile and compact, it can be easily installed on any type of vehicle. The horn is composed of two heavy duty compressors and a high resistance nylon base with two chromed metal trumpets. It is supplied with relay, air hoses and fixing hardware.

GT52 brass chromed horn, 60 cm long

Compressed air horn for external mounting. Powerful sound. Brass chromed trumpet, complete with fixing hardware, excluding control valves. Available in three lengths: 750 mm - 680 mm - 600 mm.

EMH-M Electronic whistle + mike

Waterproof electronic whistle complete with loudspeaker, AISI 316 stainless steel bracket and electronic unit with microphone.

EMH-MS Electronic whistle + mike + siren

Waterproof electronic whistle complete with loudspeaker, AISI 316 stainless steel bracket and electronic unit with microphone.

TM80/H single Horn 2 pins high tone

Electromagnetic single horn, Ø 80 mm, twin pole. High sound.

SMILE built-in horn with chromed grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in white ASA, UV resistant. Grille in chromed ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

TA1R portable gas horn, s.s. diaphrame

Gas horn complete with plastic trumpet with stainless steel base and bottle containing non-inflammable gas.

MA1-C Single plastic chromed horn

Single air horn for boats, entirely manufactured of non-corrosive materials. Plastic chromed trumpet, complete with compressor, fixing hardware and relay.

EM1 Stainless steel horn, long

Single electromagnetic horn with stainless steel trumpet. Powerful acoustic unit carefully protected and manufactured of non-corrosive materials, complete with fixing hardware.

SHARK Single horn, chromed , blister

Electromagnetic horn for small boats. High impact casing in chromed or white ASA and mounting bracket in AISI 304 stainless steel for easy installation. Very powerful sound and streamlined design. Excellent drainage system.

EMX1 Horn, stainless steel long

Single or double electromagnetic horn with stainless steel trumpet , bracket and membrane. New support design with integrated cable. Complete with fixing hardware.

HURRICANE Built-in air horn with chromed grill

Enclosure type electropneumatic horn for boats. A great innovation is the integrated compressor with horn, enabling immediate sound output when pressing the push button. No air hosing is therefore required. ASA grille and steel bracket. Typically marine low tone and extraordinary powerful sound. Rapid enclosure type installation. Suitable for commercial boats, ferries, yachts under 12 meters, sea dredges and rubber dinghies.

K1/S Horn, brass chromed, external mounting

Single air horn for external mounting, complete with electric compressor, relay and fixing hardware. Brass chromed trumpet, particularly suitable for installation on vans, campers, pick-ups, off-road vehicles etc.

HURRICANE Built-in air horn with grill

Enclosure type electropneumatic horn for boats. A great innovation is the integrated compressor with horn, enabling immediate sound output when pressing the push button. No air hosing is therefore required. ASA grille and steel bracket. Typically marine low tone and extraordinary powerful sound. Rapid enclosure type installation. Suitable for commercial boats, ferries, yachts under 12 meters, sea dredges and rubber dinghies.

A2/R twin plastic horns

Air horn complete with electric compressor, combined sound. Two plastic trumpets, complete with relay, tubing and fixing hardware.

MA1-S Single brass chromed horn

Single air horn for boats, entirely manufactured of non-corrosive materials. High quality chromed brass trumpet, complete with compressor, fixing hardware and relay.

SMILE Built-in horn with black grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in black ASA, UV resistant. Grille in black ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

P1/LS brass chromed horn, external mounting

Compressed air horn for external mounting. Brass chromed trumpet, complete with fixing hardware excluding control valves. Available in two lengths: 500 and 590 mm.

TA1X portable gas horn s.s. diaph., HFO 200 ml

Gas horn, complete with plastic trumpet with stainless steel bottom plate and 200 ml bottle containing environmentally safe non-inflammable gas (HFO 1234ze). In accordance with European Directive No.517 / 2014. The color of the bottle may be different.

P1/S brass chromed horn, external mounting