Products : 430, 335, 3200, 228, 330, 170, 175, 400, 370, 320, 328/368/412, 500/400, 600/735, 1850, 698 and 380

90/1-E ø90 electronic disc horn

Electronic horn, ø90 mm, 2 or 3 pins type, extensively developed for OEM applications. High tone, guaranteed for 1.000.000 cycles. The internal contacts are replaced by a transistor. Low level of electromagnetic interference. Particularly suitable for forklifts and earth-moving machines.

70/1-H ø70 disc horn high tone

Electromagnetic horn, Ø70 mm, twin pole, high tone. Suitable for narrow spaces and for motorcycles.

P1/2-E electronic horn 3 alternating notes

Compressed air horn with three alternating notes and possibility of combined sound. Available also with two different sounds on request, complete with electric valves and electronic alternating device. Metal chromed trumpets. Installation in engine compartment.

CTA1 trumpet for hand horn TA1

Trumpet for gas horns , snap-on type

JE/120 black plastic horn, internal mounting

Compressed air horn complete with electric valve. Installation in engine compartment.

TA1-H hand horn, snap-on, HFO 200 ml

Hand held gas horn, snap-on type, complete with aluminium bottle Environmentally safe non-inflammable gas (HFO 1234ze) 200 ml. In accordance with European Directive No.517 / 2014. The color of the bottle may be different

EW3-M electronic whistle 20/75m + ampli + fog signal

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

TA1 hand horn, snap-on, inflammable, 200 ml

Hand held gas horn, snap-on type, complete with aluminium bottle. Environmentally safe inflammable gas 200 ml

EMX2 Horn, stainless steel short

Single or double electromagnetic horn with stainless steel trumpet , bracket and membrane. New support design with integrated cable. Complete with fixing hardware.

TM80/N set of horns 2 pins

Set of electromagnetic horns, Ø 80 mm, twin pole, complete with relay and mounting hardware.

EW3 electronic whistle 20/75 m + fog signal

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

SMILE Built-in horn with white grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in white ASA, UV resistant. Grille in white or chromed ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

SHARK Single horn, white plastic, blister

Electromagnetic horn for small boats. High impact casing in chromed or white ASA and mounting bracket in AISI 304 stainless steel for easy installation. Very powerful sound and streamlined design. Excellent drainage system.

EM2 Stainless steel horn, short

Single electromagnetic horn with stainless steel trumpet. Powerful acoustic unit carefully protected and manufactured of non-corrosive materials, complete with fixing hardware.

P2/3-E Electronic horn 3 alternating notes

Compressed air horn with three sound in two sequences. Complete with electric valves and electronic alternating device. Metal chromed trumpets. Installation in engine compartment.

TM80/L single Horn 2 pins low tone

Electromagnetic single horn, Ø 80 mm, twin pole. Low sound.

K3/4 Horn, 3 alternating notes, chromed metal

Air horn complete with electric compressor, three tones sounding in succession or in tune. Metal chromed trumpets, complete with relay, tubing and fixing hardware.

EW3-MS electronic whistle 20/75 m + fog signal + mic.+ siren

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

BK2 back-up alarm 100 dB

Universal voltage waterproof horn with intermittent sound, particularly suitable for signalling operations such as: opening of deck and engine compartment; pulling out of gangways; crane, davit and cathead operating; malfunctioning of electronic devices.

MGT/L stainless steel horn + chromed shield

Compressed air horn for external mounting. Powerful sound. Stainless steel trumpet, complete with fixing hardware and front covers. Available with or without 24 V electric valve. Fits Mercedes ACTROS trucks.

SMILE built-in horn with chromed grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in white ASA, UV resistant. Grille in chromed ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

MGT/H stainless steel horn + chromed front cover

Compressed air horn for external mounting. Powerful sound. Stainless steel trumpet, complete with fixing hardware and front covers. Available with or without 24 V electric valve. Fits Mercedes ACTROS trucks.

TA1R portable gas horn, s.s. diaphrame

Gas horn complete with plastic trumpet with stainless steel base and bottle containing non-inflammable gas.

EM1 Stainless steel horn, long

Single electromagnetic horn with stainless steel trumpet. Powerful acoustic unit carefully protected and manufactured of non-corrosive materials, complete with fixing hardware.

90/1-L ø90 disc horn low tone

Electromagnetic disc horn, Ø90 mm, twin pole, high (-H) or low (-L) tone, complete with mounting hardware.

SHARK Single horn, chromed , blister

Electromagnetic horn for small boats. High impact casing in chromed or white ASA and mounting bracket in AISI 304 stainless steel for easy installation. Very powerful sound and streamlined design. Excellent drainage system.

EMX1 Horn, stainless steel long

Single or double electromagnetic horn with stainless steel trumpet , bracket and membrane. New support design with integrated cable. Complete with fixing hardware.

A2/R twin plastic horns

Air horn complete with electric compressor, combined sound. Two plastic trumpets, complete with relay, tubing and fixing hardware.

MA1-S Single brass chromed horn

Single air horn for boats, entirely manufactured of non-corrosive materials. High quality chromed brass trumpet, complete with compressor, fixing hardware and relay.

SMILE Built-in horn with black grill, blister

Inside mounted electromagnetic horn for small rubber and sailing boats. Mounting system through a fast front positioning. Body in black ASA, UV resistant. Grille in black ASA with snap-on system. Breathable protection membrane. Horn with loud sound and marine tone.

TA1X portable gas horn s.s. diaph., HFO 200 ml

Gas horn, complete with plastic trumpet with stainless steel bottom plate and 200 ml bottle containing environmentally safe non-inflammable gas (HFO 1234ze). In accordance with European Directive No.517 / 2014. The color of the bottle may be different.

P1/S brass chromed horn, external mounting

Compressed air horn for external mounting. Brass chromed trumpet, complete with fixing hardware excluding control valves. Available in two lengths: 500 and 590 mm.

K1 Horn, metal chromed, external mounting

Single air horn for external mounting, complete with electric compressor, relay and fixing hardware. Metal chromed trumpet, particularly suitable for installation on vans, campers, pick-ups, off-road vehicles etc.