• Login
ADVANCED SEARCH
Application
All Automotive Industrial Marine

Pumps

Products
  4. Pumps
Application
All Automotive Industrial Marine
3D View
  1. Yes
Youtube Video
  1. Yes
Voltage (V)
  1. 100÷240V
  2. 110V-60Hz
  3. 12
  4. 12/24
  5. 230V-50Hz
  6. 24
  7. 400V 50Hz
  8. 400V-50Hz
  9. 48
Show Less Show More
Fluids
  1. Diesel
  2. Oil
  3. Oil & Diesel
Consumption (A)
0,3 8 / 4 0,3 to 8 / 4
Flow rate (l/min)
5 Max 10 5 to Max 10
Pressure (bar)
1 7 1 to 7
Ports (BSP)
  1. 1"
  2. 1/2"
  3. 3/4"
  4. 3/8"
Pump Model
  1. UP2/E
  2. UP3
  3. UP3/E
  4. UP6
Connector
  1. Faston 6.3x0.8
  2. RJ11
Diameter (mm)
  1. 8 - 6
Hose (ID) (mm)
  1. 12
  2. 13
  3. 13-14
  4. 16
  5. 16-17
  6. 19
  7. 19-20
  8. 20
  9. 25
  10. 30
  11. 32
  12. 38
Show Less Show More
IP Protection
  1. 44
  2. 55
  3. 65
  4. 67
Motor power (W)
  1. 120
  2. 150
  3. 168
  4. 180
  5. 180 + 360
  6. 180x2
  7. 200
  8. 250
  9. 260
  10. 2x360
  11. 2x400
  12. 30
  13. 50
  14. 90
  15. 360
  16. 370
  17. 400
  18. 550
Show Less Show More
Fresh Water
  1. <
Salt Water
  1. <
Chemical liquids
  1. <
Greywater
  1. <
Diesel
  1. <
Submersible
  1. <
Automatic
  1. <
High Pressure
  1. <
Electronic
  1. <
Remote Control
  1. <
Reversible
  1. <
Portable Kit
  1. <

Grid  List 

Set Descending Direction
  1. UP9/OIL (ex UP6/oil) gear pump for lubricating oil

    UP9/OIL (ex UP6/oil) gear pump for lubricating oil

    Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.
  2. UP6/E electronic water pressure system 26 l/min

    UP6/E electronic water pressure system 26 l/min

    Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Available also with control panel.
  3. UP3 Bronze gear pump 15 l/min

    UP3 Bronze gear pump 15 l/min

    Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.
  4. UP3/E electronic water pressure system 15 l/min

    UP3/E electronic water pressure system 15 l/min

    Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.
  5. UP2/OIL gear pump for lubricating oil

    UP2/OIL gear pump for lubricating oil

    Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.
  6. UP1 pump rubber impeller 35 l/min

    UP1 pump rubber impeller 35 l/min

    Self-priming electric water pumps with selflubricating flexible impeller for prolonged service life and better performance. Nickelplated brass body with stainless steel shaft.
  7. UP3/OIL gear pump for lubricating oil

    UP3/OIL gear pump for lubricating oil

    Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.
  8. UP12/E electronic water pressure system 36 l/min

    UP12/E electronic water pressure system 36 l/min

    Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.
  9. UP10-HD heavy duty pump with flange, 7 bar, 18 l/min

    UP10-HD heavy duty pump with flange, 7 bar, 18 l/min

    Self-priming electric pumps for transferring of liquids up to 7 bar pressure. Pump body in nickel-plated brass. Main application: high pressure spraying.
  10. UP1-J pump, rubber impeller 28 l/min

    UP1-J pump, rubber impeller 28 l/min

    Self-priming electric pump with rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.
  11. UP9 Heavy duty pump 12 l/min

    UP9 Heavy duty pump 12 l/min

    Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.
  12. UP8 heavy duty pump 10 l/min

    UP8 heavy duty pump 10 l/min

    Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.
  13. UP1-M pump, rubber impeller 45 l/min

    UP1-M pump, rubber impeller 45 l/min

    Self-priming electric pump with selflubricating rubber impeller. Now available in 3 different flow rates: 25, 35 and 45 liters/minute. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.
  14. UP6 bronze Gear pump 26 l/min

    UP6 bronze Gear pump 26 l/min

    \\Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.
  15. UP9/E-BR bronze gear pump with electronic pressure sensor + SCS 12 l/min

    UP9/E-BR bronze gear pump with electronic pressure sensor + SCS 12 l/min

    Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.
  16. UP14/E electronic water pressure pump 46 l/min

    UP14/E electronic water pressure pump 46 l/min

    Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. PCS control panel included.
  17. UP9-XC heavy duty gear pump 12 l/min - s.s. AISI 316

    UP9-XC heavy duty gear pump 12 l/min - s.s. AISI 316

    Self-priming electric pumps for transferring of liquids up to 5 bar pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.
  18. UP2/E electronic water pressure system 12 l/min

    UP2/E electronic water pressure system 12 l/min

    Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.
  19. UP3-P PEEK gear pump 15 l/min

    UP3-P PEEK gear pump 15 l/min

    Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.
  20. UP2 bronze gear pump 10 l/min

    UP2 bronze gear pump 10 l/min

    Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.
  21. UP1-JR reversible impeller pump 28 l/min with on/off integrated switch

    UP1-JR reversible impeller pump 28 l/min with on/off integrated switch

    Professional range of self-priming electric 12V and 24V pumps. Ideal for bilge and waste water on any type of boat. ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.
  22. UP3/OIL-R revers. pump lubricating oil + integr.on/off switch

    UP3/OIL-R revers. pump lubricating oil + integr.on/off switch

    Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.
  23. UP6-P PEEK gear pump 26 l/min

    UP6-P PEEK gear pump 26 l/min

    Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service, transfer of water.
  24. UP14/OIL gear pump for lubricating oil

    UP14/OIL gear pump for lubricating oil

    Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps and for engines lubricating operations.
  25. UP12/OIL gear pump for lubricating oil

    UP12/OIL gear pump for lubricating oil

    Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps and for engines lubricating operations.
  26. UP14-P PEEK gear pump 46 l/min

    UP14-P PEEK gear pump 46 l/min

    Self-priming electric pumps with PEEK gears. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service, transfer of water.
  27. UP8-XC heavy duty gear pump 10 l/min - s.s. AISI 316

    UP8-XC heavy duty gear pump 10 l/min - s.s. AISI 316

    Self-priming electric pumps for transferring of liquids up to 4 bar pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.
  28. UP8-P heavy duty pump, PEEK gears, 10 l/min

    UP8-P heavy duty pump, PEEK gears, 10 l/min

    Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.
  29. UP14 bronze gear pump 46 l/min

    UP14 bronze gear pump 46 l/min

    Self-priming electric pump of small dimension with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.
  30. UP12 bronze gear pump 36 l/min

    UP12 bronze gear pump 36 l/min

    Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.
  31. UP12-P PEEK gear pump 36 l/min

    UP12-P PEEK gear pump 36 l/min

    Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service, transfer of water.
  32. UP6/E-DX electronic dual pump system 52 l/min

    UP6/E-DX electronic dual pump system 52 l/min

    Self-priming water pressure systems with two connected pumps with electronic control Speed motor related to the flow rate. Reduced consumption and noise. Accumulator tank is not required. Protected against overloads. Pump functions monitored by 2 led. “Empty tank” signal and shut-off device.
  33. UP9-P heavy duty gear pump 12 l/min - PEEK gears - FKM O-Ring

    UP9-P heavy duty gear pump 12 l/min - PEEK gears - FKM O-Ring

    Self-priming electric pumps for transferring of liquids up to 5 bar pressure. Pump body in nickel-plated brass. Main application: high pressure spraying.
  34. UP2-P PEEK gear pump 10 l/min

    UP2-P PEEK gear pump 10 l/min

    Self-priming electric pumps with PEEK gears. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.
  35. AS3 automatic float switch for bilge pumps - Heavy Duty

    AS3 automatic float switch for bilge pumps - Heavy Duty

    Automatic float switch for bilge pumps.
  36. UP500 Submersible pump 32 l/min

    UP500 Submersible pump 32 l/min

    Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.
  37. UP1500 Submersible pump 95 l/min

    UP1500 Submersible pump 95 l/min

    Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.
  38. UP1000 submersible pump 63 l/min

    UP1000 submersible pump 63 l/min

    Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.
  39. UP2000 submersible pump 126 l/min

    UP2000 submersible pump 126 l/min

    Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.
  40. UP3/AC gear pump

    UP3/AC gear pump

    Self-priming electric pump for transferring diesel and viscous liquids. Brass gears, pump body and connections in nickel-plated brass, shaft in stainless steel. Seal in FKM and O-ring in NBR.
  41. OCK1-R Oil change Kit with integrated reversible switch

    OCK1-R Oil change Kit with integrated reversible switch

    Compact size oil change kit. Easy to operate and carry. Complete with bronze gears pump, clips, fuse, hoses and accessories for transfer operations. Available also with electronic control panel and 12/24V universal voltage.
  42. UP8-RE reversible electronic pump 10 l/min with flow regulation

    UP8-RE reversible electronic pump 10 l/min with flow regulation

    Heavy duty Electronic Gear pump 10 l/min and 3,5 bar. Integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate; the flow rate is also automatically adjusted according to the viscosity of the fluid to avoid cavitation. Best for oil and diesel transferring. Compact and Easy to operate and carry.
  43. UPX gear pump 15 l/min - s.s. AISI 316 L

    UPX gear pump 15 l/min - s.s. AISI 316 L

    Self-priming electric pumps for transferring liquids for the food industry. Pump body and connections in stainless steel. O-Rings made of Silicone.
  44. UP3700 submersible pump 230 l/min

    UP3700 submersible pump 230 l/min

    Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.
  45. VP45-N vane pump 45 l/min

    VP45-N vane pump 45 l/min

    Self-priming electric vane pump with integrated by-pass valve. Aluminum body. Two options connection for 25 mm hose. Rotor and vanes made of resin. Brush holder with EMI filter. Main applications: diesel, oil and anti-freeze refuelling. Available also with case and handle for easy transport, On/Off switch and battery clips.
  46. OCS6/E electronic Oil Change System - 6 BSP Valves

    OCS6/E electronic Oil Change System - 6 BSP Valves

    Compact oil change electronic systems for fixed boat installations. Conceived for oil fill and drain operations for all on-board uses like generators, engines, transmissions and catwalks. Their electronic control adjusts the speed of the pump according to oil viscosity/temperature and increases its speed during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation. OCS are indicated for a perfect cleaning of all on-board areas while avoiding leaks and dispersions on the boat floor. Easy to operate and carry.
  47. UP10/E electronic water pressure system 18 l/min

    UP10/E electronic water pressure system 18 l/min

    Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits, campers.
  48. UP9-XA heavy duty gear pump with flange 12 l/min - s.s. AISI 316

    UP9-XA heavy duty gear pump with flange 12 l/min - s.s. AISI 316

    Self-priming electric pumps for transferring of liquids up to 5 bar pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.
  49. UP1-B ballast pump with rubber impeller 45 l/min

    UP1-B ballast pump with rubber impeller 45 l/min

    Self-priming electric water pumps with selflubricating flexible impeller for prolonged service life and better performance. Nickelplated brass body with stainless steel shaft.
  50. UP8/E-BR bronze gear pump with electr. pressure sensor + SCS 10 l/min

    UP8/E-BR bronze gear pump with electr. pressure sensor + SCS 10 l/min

    Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seals and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.
  51. UP9/E electronic water pressure system 12 l/min

    UP9/E electronic water pressure system 12 l/min

    Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits, campers.
  52. IMP1 NBR Rubber Impeller for UP1/M/AC

    IMP1 NBR Rubber Impeller for UP1/M/AC

    Impeller of special nitril rubber. Original spare part for UP1, UP1-M and UP1/AC. Dimensions: 22 x Ø 51.5 mm - bore Ø 8 mm.
  53. UP6-PV PEEK gear pump with check valve 26 l/min

    UP6-PV PEEK gear pump with check valve 26 l/min

    Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.
  54. UPX/AC gear pump 10 l/min - s.s. AISI 316

    UPX/AC gear pump 10 l/min - s.s. AISI 316

    Self-priming electric pumps, 230V, for transferring liquids for the food industry. Pump body and connections in stainless steel. O-rings of Silicone.
  55. UP3/A water pressure system 15 l/min

    UP3/A water pressure system 15 l/min

    Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.
  56. ATX2 stainless steel accumulator tank 2 l with 1/2" T-nipple

    ATX2 stainless steel accumulator tank 2 l with 1/2" T-nipple

    Stainless steel accumulator tank for automatic pumps. Stainless steel connection. Butyl membrane for liquid foodstuff
  57. UP12-LO bronze gear pump for light oils

    UP12-LO bronze gear pump for light oils

    Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps and for engines lubricating operations.
  58. UP10-XA pump for weed killers 18 l/min - s.s. AISI 316

    UP10-XA pump for weed killers 18 l/min - s.s. AISI 316

    Self-priming electric pumps for transferring of liquids up to 7 bar pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.
  59. UP3-R gear pump 15 l/min with integr. reversible switch

    UP3-R gear pump 15 l/min with integr. reversible switch

    Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, light oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.
  60. UP6/A water pressure system 26 l/min

    UP6/A water pressure system 26 l/min

    Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.
  61. OCS3/E electronic Oil Change System - 3 BSP Valves

    OCS3/E electronic Oil Change System - 3 BSP Valves

    Compact oil change electronic systems for fixed boat installations. Conceived for oil fill and drain operations for all on-board uses like generators, engines, transmissions and catwalks. Their electronic control adjusts the speed of the pump according to oil viscosity/temperature and increases its speed during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation. OCS are indicated for a perfect cleaning of all on-board areas while avoiding leaks and dispersions on the boat floor. Easy to operate and carry.
  62. UP10-P heavy duty pump 18 l/min - PEEK gears - FKM O-Rings

    UP10-P heavy duty pump 18 l/min - PEEK gears - FKM O-Rings

    Self-priming electric pumps for transferring of liquids up to 7 bar pressure. Pump body in nickel-plated brass. Main application: high pressure spraying.
  63. UP6/AC gear pump PEEK

    UP6/AC gear pump PEEK

    Self-priming electric pump for transferring diesel and water. PEEK gears, pump body and connections in nickel-plated brass, shaft in stainless steel. Seal in FKM and O-ring in NBR.
  64. AT1 accumulator tank, 2 l , white

    AT1 accumulator tank, 2 l , white

    White coated steel accumulator tank for automatic pumps. Stainless steel connection. Butyl membrane for liquid foodstuff
  65. UP14/AC PEEK gear pump

    UP14/AC PEEK gear pump

    Self-priming electric pump for transferring diesel and water. PEEK gears, pump body and connections in nickel-plated brass, shaft in stainless steel. Seals in FKM and O-ring in NBR.
  66. UP10 heavy duty pump 18 l/min

    UP10 heavy duty pump 18 l/min

    Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.
  67. OCK1 oil change Kit

    OCK1 oil change Kit

    Compact size oil change kit. Easy to operate and carry. Reversible: draws and fills oil. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. Available also with electronic control panel and 12/24V universal voltage.
  68. IMP2 NBR Rubber impeller for UP1-J

    IMP2 NBR Rubber impeller for UP1-J

    Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x Ø 40.5 mm - bore Ø 8 mm.
  69. UP9-HD heavy duty pump with flange 12 l/min

    UP9-HD heavy duty pump with flange 12 l/min

    Self-priming electric pumps for transferring of liquids. Pump body in nickel-plated brass. Main application: high pressure spraying.
  70. UP14/E-DX electronic dual pump system + PCS 92 l/min

    UP14/E-DX electronic dual pump system + PCS 92 l/min

    Self-priming water pressure systems with two connected pumps with electronic control Speed motor related to the flow rate. Delayed start of the auxiliary pump. Reduced consumption and noise. Accumulator tank is not required. Protected against overloads. Pump functions monitored by 2 led. “Empty tank” signal and shut-off device.
  71. DP12/E deck washing pump + electronic control 6 bar

    DP12/E deck washing pump + electronic control 6 bar

    Complete kits including an electronic self-priming electric pump with electronic control. Equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable coil hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.
  72. OCS9/E electronic Oil Change System - 9 BSP Valves

    OCS9/E electronic Oil Change System - 9 BSP Valves

    Compact oil change electronic systems for fixed boat installations. Conceived for oil fill and drain operations for all on-board uses like generators, engines, transmissions and catwalks. Their electronic control adjusts the speed of the pump according to oil viscosity/temperature and increases its speed during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation. OCS are indicated for a perfect cleaning of all on-board areas while avoiding leaks and dispersions on the boat floor. Easy to operate and carry.
  73. UPX-C chem pump 15 l/min - s.s. AISI 316

    UPX-C chem pump 15 l/min - s.s. AISI 316

    Self-priming electric pumps for transferring of chemical liquids. Pump body and connections in stainless steel. Seal and O-rings made of FKM.
  74. UPX-C/AC chem pump 10 l/min s.s. AISI 316

    UPX-C/AC chem pump 10 l/min s.s. AISI 316

    Self-priming electric pump, 230V, for transferring of chemical liquids. Pump body and connections in stainless steel. Seal and O-rings in FKM.
  75. UP2-PV PEEK gear pump 10 l/min with check valve

    UP2-PV PEEK gear pump 10 l/min with check valve

    Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.
  76. UP3-S gear pump 15 l/min with integrated on/off switch

    UP3-S gear pump 15 l/min with integrated on/off switch

    Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.
  77. UP66/E-DX electronic water pressure dual pump system 66 l/min

    UP66/E-DX electronic water pressure dual pump system 66 l/min

    Self-priming water pressure systems with two connected pumps with electronic control Speed motor related to the flow rate. Reduced consumption and noise. Accumulator tank is not required. Protected against overloads. Pump functions monitored by 2 led. “Empty tank” signal and shut-off device.
  78. UP12/A-V5 water pressure system+ 5 l tank

    UP12/A-V5 water pressure system+ 5 l tank

    Water pressure systems equipped with accumulator tank. Protected by an integrated fuse. The pumps can supply up to 5 faucets at the same time and are suitable for boats up to 60 feet. Extremely compact, they are easy to be installed in the engine compartment.
  79. UP6-RK reversible pump kit 20 l/min with panel

    UP6-RK reversible pump kit 20 l/min with panel

    Electronically controlled pumps for oil and diesel filling and draining operations. The touchpad electronic sensor adjusts the speed of the motor according to the liquid viscosity and temperature. Compact design. Fits in any engine room. Automatic shut-off in case of empty tank, short circuit and after 30 minutes of operation. Fittings with 1 or 2 valves available.
  80. IS14 In-line filter 3/8"

    IS14 In-line filter 3/8"

    Transparent in-line filter with AISI 304 stainless steel net. Snap-on locking for easy inspection and cleaning.
  81. DQC Deck quick connection for washing pumps

    DQC Deck quick connection for washing pumps

    Quick connection for washing pump, integrated in a built-in white container with cover and gasket. Particulary easy to install and suitable for fast washing operations thanks to the quick-click connector for the gun coil hose.
  82. OCK1-E Reversible oil/diesel transfer kit

    OCK1-E Reversible oil/diesel transfer kit

    Compact size oil change kit. Easy to operate and carry. Reversible: draws and fills oil. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. Available also with electronic control panel and 12/24V universal voltage.
  83. AT2 accumulator tank, 5 l , white

    AT2 accumulator tank, 5 l , white

    White coated steel accumulator tank for automatic pumps. Stainless steel connection. Butyl membrane for liquid foodstuff
  84. TK1/2 pump kit UP2/E with 107 l tank

    TK1/2 pump kit UP2/E with 107 l tank

    Tank kit for fresh or salt water, complete with pressure pump. Suitable for shower systems, sinks and toilets.
  85. UP12/E-DX electronic dual pump system 72 l/min

    UP12/E-DX electronic dual pump system 72 l/min

    Self-priming water pressure systems with two connected pumps with electronic control Speed motor related to the flow rate. Delayed start of the auxiliary pump. Reduced consumption and noise. Accumulator tank is not required. Protected against overloads. Pump functions monitored by 2 led. “Empty tank” signal and shut-off device. Available also with control panel.
  86. UP1/AC 230V 50 Hz pump rubber impeller 30 l/min

    UP1/AC 230V 50 Hz pump rubber impeller 30 l/min

    Self-priming electric pump for transfer of fresh or salt water with flexible impeller of nitrile rubber which allows the problem-free transit of small particles. Nickel-plated brass body, shaft in stainless steel. Electric motor 0,55 kW.
  87. VP45-S vane pump 45 l/min with integrated on/off switch

    VP45-S vane pump 45 l/min with integrated on/off switch

    Professional range of self-priming electric 12 V and 24 V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap.
  88. SP2 Shower pump kit

    SP2 Shower pump kit

    Shower kits complete with self-priming pump with electronic control. Equipped with helical PEEK gears, nickel-plated brass body and connections, integrated check valve. Complete with 4m white hose with screw connections and hand washer equipped with built-in white container. The kit is especially suitable for yachts, rubber dinghies and sailing boats.
  89. VP45-K refuelling kit with 45 l/min vane pump

    VP45-K refuelling kit with 45 l/min vane pump

    Kit for diesel refueling. Includes the vane pump with integrated by-pass valve and battery clips. Refueling gun, 2 m priming hose, 3 m delivery hose and intake filter.
  90. UP3-CK portable gear pump kit 15 l/min

    UP3-CK portable gear pump kit 15 l/min

    Self-priming electric pump with bronze gears for diesel transfer. Featuring a new case with handle for improved protection and easy transport. Completed by On/Off switch, cable with integrated fuse and battery clips.
  91. IS16 In-line filter 1/2" BSP

    IS16 In-line filter 1/2" BSP

    Transparent in-line filter with AISI 304 stainless steel net. Snap-on locking for easy inspection and cleaning.
  92. DP3 Deck washing pump kit - 3 bar

    DP3 Deck washing pump kit - 3 bar

    Complete kits including an automatic self-priming electric pump equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.
  93. VP45 Battery kit with 45 l/min vane pump

    VP45 Battery kit with 45 l/min vane pump

    Self-priming electric vane pump with integrated by-pass valve. Aluminum body. Two options connection for 25 mm pipe. Rotor and vanes made of resin. Brush holder with EMI filter. Main applications: diesel, oil and anti-freeze refuelling. Available also with case and handle for easy transport, On/ Off switch and battery clips.
  94. PCS control panel for electronic pumps

    PCS control panel for electronic pumps

    The control panel for electronic pumps allows to remotely monitor the operation of the pump and interact with it. It is in fact possible to see when the pump is On and if there is still liquid to be transferred. Moreover, in case of arrest due to end of liquid or overload you can reset the alarm and restart the system without having to turn off the power. Finally, you can turn Off and On the pump with the simple push of a button. The panel can be mounted or recessed in a circular hole of diameter 70 mm, or with external mounting by fixing the provided square box with two screws. To operate simply connect the pump with the 3m cable supplied or another 4-wire phone cord and double-ended RJ11 / 6. In the back there is a terminal block that allows you to replicate the buttons and LEDs of the panel on an external circuit: this allows you to individually control the features on the dashboard or in a device designed by third parties.
  95. UP12/A water pressure system PEEK gears 36 l/min

    UP12/A water pressure system PEEK gears 36 l/min

    Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.
  96. UP3-RK reversible pump kit with panel 15 l/min

    UP3-RK reversible pump kit with panel 15 l/min

    Diesel transfer Kit with electronic control. During priming the speed of the pump increases and the system automatically shuts off in case of empty tank and short circuit. Being equipped with a reverse-flow function system, this kit is particularly indicated for tank balancing operations on board.
  97. UP3-PV PEEK gear pump 15 l/min with check valve

    UP3-PV PEEK gear pump 15 l/min with check valve

    Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.
  98. UP1-JS impeller pump 28 l/min with integrated on/off switch

    UP1-JS impeller pump 28 l/min with integrated on/off switch

    Professional range of self-priming electric 12V and 24V pumps. Ideal for bilge and waste water on any type of boat. ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.
  99. UP12/A-V20 water pressure system + 20 l tank

    UP12/A-V20 water pressure system + 20 l tank

    Water pressure systems equipped with accumulator tank. Protected by an integrated fuse. The pumps can supply up to 5 faucets at the same time and are suitable for boats up to 60 feet. Extremely compact, they are easy to be installed in the engine compartment.
  100. DP3/E deck washing pump + electronic control 3 bar

    DP3/E deck washing pump + electronic control 3 bar

    Complete kits including an electronic self-priming electric pump with electronic control. Equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.
  101. DP12 deck washing pump kit - 5 bar

    DP12 deck washing pump kit - 5 bar

    Complete kit including an automatic self-priming electric pump equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.
  102. ATX1 stainless steel accumulator tank 0,5 l with 3/8" T-nipple

    ATX1 stainless steel accumulator tank 0,5 l with 3/8" T-nipple

    Stainless steel accumulator tank for automatic pumps. Stainless steel connection. Butyl membrane for liquid foodstuff
  103. UP12-LOCK portable gear pump kit for oil and diesel

    UP12-LOCK portable gear pump kit for oil and diesel

    Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps and for engines lubricating operations.
  104. VP45/AC Vane pump 35 l/min

    VP45/AC Vane pump 35 l/min

    Self-priming vane pump for diesel refueling. 220V version. With integrated by-pass valve, aluminum body and flange, double possibility of connection. Heavy Duty.
  105. DP9/E deck washing pump + electronic control 4,5 bar

    DP9/E deck washing pump + electronic control 4,5 bar

    Complete kits including an electronic self-priming electric pump with electronic control. Equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.
  106. OCS5/E electronic Oil Change System - 5 BSP Valves

    OCS5/E electronic Oil Change System - 5 BSP Valves

    Compact oil change electronic systems for fixed boat installations. Conceived for oil fill and drain operations for all on-board uses like generators, engines, transmissions and catwalks. Their electronic control adjusts the speed of the pump according to oil viscosity/temperature and increases its speed during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation. OCS are indicated for a perfect cleaning of all on-board areas while avoiding leaks and dispersions on the boat floor. Easy to operate and carry.
  107. UP2/A water pressure system 10 l/min

    UP2/A water pressure system 10 l/min

    Self-priming electric pumps with PEEK helical gears. Pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.
  108. DHK1 Deck Hose Kit - 15 m retractible hose+ 3/4" conn. spray gun, quick conn.

    DHK1 Deck Hose Kit - 15 m retractible hose+ 3/4" conn. spray gun, quick conn.

    Deck hose kit with 15m/50ft retractible hose, spray gun, 3/4” connection. Nickel plated brass fittings and quick connection suitable for DQC.
  109. OCK8-E Reversible electronic oil change kit 10 l/min with flow regulation

    OCK8-E Reversible electronic oil change kit 10 l/min with flow regulation

    Electronic oil change kit 10 l/min with integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate. The flow rate is also automatically adjusted according to the viscosity of the fluid to avoid cavitation. Best for oil and diesel transferring. Compact and Easy to operate and carry. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. NOW AVAILABLE !
  110. UP6/A-AC water pressure system with 20 l tank

    UP6/A-AC water pressure system with 20 l tank

    Water pressure systems equipped with accumulator tank. Protected by an integrated fuse. The pumps can supply up to 5 faucets at the same time and are suitable for boats up to 60 feet. Extremely compact, they are easy to be installed in the engine compartment.
  111. UP10-XC heavy duty pump 18 l/min - AISI 316 L

    UP10-XC heavy duty pump 18 l/min - AISI 316 L

    Self-priming electric pumps for transferring of liquids up to 7 bar pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.
  112. UP2/E-BR bronze gear pump with electronic pressure sensor 10 l/min

    UP2/E-BR bronze gear pump with electronic pressure sensor 10 l/min

    Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.
  113. DP9 deck washing pump kit - 4 bar

    DP9 deck washing pump kit - 4 bar

    Complete kits including an automatic self-priming electric pump equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.
  114. UP9/A heavy duty water pressure system 12 l/min

    UP9/A heavy duty water pressure system 12 l/min

    Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.
  115. UP6/OIL-AC pump for oil

    UP6/OIL-AC pump for oil

    Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft.
  116. UP14/OIL-AC pump for oil

    UP14/OIL-AC pump for oil

    Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft.
  117. UP8/E electronic water pressure system 10 l/min

    UP8/E electronic water pressure system 10 l/min

    Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.
  118. OK1 tube kit for oil pumps

    OK1 tube kit for oil pumps

    Tube kit of ø8 (ø6) mm and ø6 (ø4) mm for oil pumps.
  119. UP14-PV PEEK gear pump 46 l/min with check valve

    UP14-PV PEEK gear pump 46 l/min with check valve

    Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.
  120. UP1-J/OIL flexible FKM impeller pump for oil

    UP1-J/OIL flexible FKM impeller pump for oil

    Flexible FKM impeller pump for oil. Self-priming electric pump with flexible impeller in FKM for oil. Nickel-plated brass body, stainless steel shaft.
  121. VP45A-S vane pump with on/off switch 45 l/min, brass fittings

    VP45A-S vane pump with on/off switch 45 l/min, brass fittings

    VP45, in all its versions, is also available with brass hose fittings ¾ BSP for hose Ø mm 20.
  122. SCS 12/24V speed control system for electronic pumps

    SCS 12/24V speed control system for electronic pumps

    With the control panel for electronic pumps, it is possible to monitor the operation of the pump (run / fail / power / flow and low / high speed) and activate its main functions: on / off, error reset, low speed and high speed. With subsequent low / high button pressures, the best speed can be set based on the viscosity of the transferred liquid. For operation, simply connect the panel to the pump with the supplied 3 m cord or other 4-wire telephone cable and double termination RJ11 / 6. The terminal block on the rear allows control of the pump using external buttons and LEDs.
  123. BF25 bottom filter and hosefittings for tubing ø 25 mm

    BF25 bottom filter and hosefittings for tubing ø 25 mm

    BF25 bottom filter and hosefittings for tubing ø 25 mm
  124. IS20 In-line filter 3/4" BSP

    IS20 In-line filter 3/4" BSP

    Transparent in-line filter with AISI 304 stainless steel net. Snap-on locking for easy inspection and cleaning.
  125. IMP2/V FKM Rubber impeller for UP1-J

    IMP2/V FKM Rubber impeller for UP1-J

    FKM rubber impeller for UP1-J. Dimensions: 22 x Ø 40.5 mm - bore Ø 8 mm.
  126. OCP2/6 Two 1/2'' valves

    OCP2/6 Two 1/2'' valves

    Oil change systems. The operative functions of the pump are electronically controlled by a membrane panel. The pump is equipped with 1 or 2 valves. Conceived for oil fill and drain operations. The electronic card adjusts the speed of the pump according to oil viscosity/temperature. It also increases the speed of the pump during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation.
  127. RJ11 Black cable with coupler for SCS / PCS

    RJ11 Black cable with coupler for SCS / PCS

    RJ11 Black cable with coupler for SCS / PCS
  128. OCP1/6 1/2'' valve

    OCP1/6 1/2'' valve

    Oil change systems. The operative functions of the pump are electronically controlled by a membrane panel. The pump is equipped with 1 or 2 valves. Conceived for oil fill and drain operations. The electronic card adjusts the speed of the pump according to oil viscosity/temperature. It also increases the speed of the pump during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation.
  129. OCP2/3 Two 3/8'' valves

    OCP2/3 Two 3/8'' valves

    Oil change systems. The operative functions of the pump are electronically controlled by a membrane panel. The pump is equipped with 1 or 2 valves. Conceived for oil fill and drain operations. The electronic card adjusts the speed of the pump according to oil viscosity/temperature. It also increases the speed of the pump during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation.
  130. KB kit of cables and battery clips

    KB kit of cables and battery clips

    Kit of cables and battery clips
  131. OCP1/3 3/8'' valve

    OCP1/3 3/8'' valve

    Oil change systems. The operative functions of the pump are electronically controlled by a membrane panel. The pump is equipped with 1 or 2 valves. Conceived for oil fill and drain operations. The electronic card adjusts the speed of the pump according to oil viscosity/temperature. It also increases the speed of the pump during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation.
  132. UP12/E-BR bronze gear pump with electronic pressure sensor + SCS 36 l/min

    UP12/E-BR bronze gear pump with electronic pressure sensor + SCS 36 l/min

    Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.
  133. BF20 bottom filter and hosefittings for tubing ø 20 mm

    BF20 bottom filter and hosefittings for tubing ø 20 mm

    Bottom filter and hosefittings for tubing ø 20 mm
  134. RCS 12/24V Electronic regulator with flow inverter

    RCS 12/24V Electronic regulator with flow inverter

    Reversible electronic system for oil fill and drain operations. The electronic control adjusts the speed of the motor according to oil viscosity/temperature and increases its speed during priming for faster operations. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation.
  135. UP6/E-BR bronze gear pump with electronic pressure sensor + SCS 26 l/min

    UP6/E-BR bronze gear pump with electronic pressure sensor + SCS 26 l/min

    Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.
  136. UP10/E-BR bronze gear pump with electronic pressure sensor + SCS 18 l/min

    UP10/E-BR bronze gear pump with electronic pressure sensor + SCS 18 l/min

    Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.
  137. TK1-SP weed killer Kit with UP2/E pump and 107 l tank

    TK1-SP weed killer Kit with UP2/E pump and 107 l tank

    Tank kit for fresh or salt water, complete with pressure pump. Suitable for shower systems, sinks and toilets.
  138. UP12/E-LO electronic pump for viscous liquids, PEEK gears

    UP12/E-LO electronic pump for viscous liquids, PEEK gears

    Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: transfer of high viscosity water-based liquids
  139. TK2/2 pump kit UP2/E with 67 l tank

    TK2/2 pump kit UP2/E with 67 l tank

    Tank kit for fresh or salt water, complete with pressure pump. Suitable for shower systems, sinks and toilets.
  140. UP12/E-LOBR electronic pump for oils, bronze gears + SCS

    UP12/E-LOBR electronic pump for oils, bronze gears + SCS

    Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.
  141. UP14/E-BR bronze gear pump with electronic pressure sensor + SCS 46 l/min

    UP14/E-BR bronze gear pump with electronic pressure sensor + SCS 46 l/min

    Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.
  142. TK2-SP weed killer Kit with UP2/E pump and 67 l tank

    TK2-SP weed killer Kit with UP2/E pump and 67 l tank

    Tank kit for fresh or salt water, complete with pressure pump. Suitable for shower systems, sinks and toilets.
  143. UP12-PV PEEK gear pump 36 l/min with check valve

    UP12-PV PEEK gear pump 36 l/min with check valve

    Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.
  144. TK1-SP3 weed killer Kit with UP3/E pump and 107 l tank

    TK1-SP3 weed killer Kit with UP3/E pump and 107 l tank

    Tank kit for fresh or salt water, complete with pressure pump. Suitable for shower systems, sinks and toilets.
  145. UP3/E-BR bronze gear pump with electronic pressure sensor + SCS 15 l/min

    UP3/E-BR bronze gear pump with electronic pressure sensor + SCS 15 l/min

    Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seals and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.
  146. UP3/OIL-AC oil / diesel gear pump 5 l/min

    UP3/OIL-AC oil / diesel gear pump 5 l/min

    Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft.

Grid  List 

Set Descending Direction
ADVANCED SEARCH
Products
  4. Pumps
3D View
  1. Yes
Youtube Video
  1. Yes
Voltage (V)
  1. 100÷240V
  2. 110V-60Hz
  3. 12
  4. 12/24
  5. 230V-50Hz
  6. 24
  7. 400V 50Hz
  8. 400V-50Hz
  9. 48
Show Less Show More
Fluids
  1. Diesel
  2. Oil
  3. Oil & Diesel
Consumption (A)
0,3 8 / 4 0,3 to 8 / 4
Flow rate (l/min)
5 Max 10 5 to Max 10
Pressure (bar)
1 7 1 to 7
Ports (BSP)
  1. 1"
  2. 1/2"
  3. 3/4"
  4. 3/8"
Pump Model
  1. UP2/E
  2. UP3
  3. UP3/E
  4. UP6
Connector
  1. Faston 6.3x0.8
  2. RJ11
Diameter (mm)
  1. 8 - 6
Hose (ID) (mm)
  1. 12
  2. 13
  3. 13-14
  4. 16
  5. 16-17
  6. 19
  7. 19-20
  8. 20
  9. 25
  10. 30
  11. 32
  12. 38
Show Less Show More
IP Protection
  1. 44
  2. 55
  3. 65
  4. 67
Motor power (W)
  1. 120
  2. 150
  3. 168
  4. 180
  5. 180 + 360
  6. 180x2
  7. 200
  8. 250
  9. 260
  10. 2x360
  11. 2x400
  12. 30
  13. 50
  14. 90
  15. 360
  16. 370
  17. 400
  18. 550
Show Less Show More
Fresh Water
  1. <
Salt Water
  1. <
Chemical liquids
  1. <
Greywater
  1. <
Diesel
  1. <
Submersible
  1. <
Automatic
  1. <
High Pressure
  1. <
Electronic
  1. <
Remote Control
  1. <
Reversible
  1. <
Portable Kit
  1. <