Products : Industrial, 150, 360, 90, 30, 200, 264, 250 and 300

UP3/E electronic water pressure system 4 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP2/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

UP3/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

UP12/E electronic water pressure system 9.5 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP10-HD heavy duty pump with flange, 101.5 psi, 4.8 gpm

Self-priming electric pumps for transferring of liquids up to 101.5 psi pressure. Pump body in nickel-plated brass. Main application: high pressure spraying.

UP1-J pump, rubber impeller 7.4 gpm

Self-priming electric pump with rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.

UP8 heavy duty pump 2.6 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

M2 compressor

Air compressor for horns

UP2/E electronic water pressure system 3.2 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP2 bronze gear pump 2.6 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP1-JR reversible impeller pump 7.4 gpm with on/off integrated switch

Professional range of self-priming electric 12V and 24V pumps. Ideal for bilge and waste water on any type of boat. ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

UP3/OIL-R revers.pump lubricating oil + integr.on/off switch

Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

UP8-XC heavy duty gear pump 2.6 gpm - s.s. AISI 316

Self-priming electric pumps for transferring of liquids up to 58 psi pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.

UP8-P heavy duty pump, PEEK gears 2.6 gpm

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.

UP12 bronze gear pump 9.5 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP12-P PEEK gear pump 9.5 gpm

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service, transfer of water.

UP2-P PEEK gear pump 2.6 gpm

Self-priming electric pumps with PEEK gears. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.

UP500 Submersible pump 8.5 gpm

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

UP2000 submersible pump 33.3 gpm

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

UP3/AC gear pump

Self-priming electric pump for transferring diesel and viscous liquids. Brass gears, pump body and connections in nickel-plated brass, shaft in stainless steel. Seal in FKM and O-ring in NBR.

OCK1-R Oil change Kit with integrated reversible switch

Compact size oil change kit. Easy to operate and carry. Complete with bronze gears pump, clips, fuse, hoses and accessories for transfer operations. Available also with electronic control panel and 12/24V universal voltage.

UP8-RE reversible electronic pump 2.6 gpm with flow regulation

Heavy duty Electronic Gear pump 2.6 gpm and 50.8 psi. Integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate; the flow rate is also automatically adjusted according to the viscosity of the fluid to avoid cavitation. Best for oil and diesel transferring. Compact and Easy to operate and carry.

UP3700 submersible pump 60.8 gpm

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

VP45-N Vane pump 11.9 gpm

Self-priming electric vane pump with integrated by-pass valve. Aluminum body. Two options connection for Ø 1" hose. Rotor and vanes made of resin. Brush holder with EMI filter. Main applications: diesel and anti-freeze refuelling. Available also with case and handle for easy transport, On/Off switch and battery clips.

UP10/E electronic water pressure system 4.8 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits, campers.

UP8/E-BR bronze gear pump with electr. pressure sensor + SCS 2.6 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seals and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UPX/AC gear pump 2.6 gpm - s.s. AISI 316

Self-priming electric pumps, 230V, for transferring liquids for the food industry. Pump body and connections in stainless steel. O-rings of Silicone.

UP3/A water pressure system 4 gpm

Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

UP12-LO bronze gear pump for light oils 6.87 gpm

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps and for engines lubricating operations.

UP10-XA pump for weed killers 4.8 gpm - s.s. AISI 316

Self-priming electric pumps for transferring of liquids up to 101.5 psi pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.

UP10-P heavy duty gear pump 4.8 gpm - PEEK gears - FKM O-Ring

Self-priming electric pumps for transferring of liquids up to 7 bar pressure. Pump body in nickel-plated brass. Main application: high pressure spraying.

UP10 heavy duty pump 4.8 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

OCK1 oil change Kit

Compact size oil change kit. Easy to operate and carry. Reversible: draws and fills oil. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. Available also with electronic control panel and 12/24V universal voltage.

UPX-C/AC chem pump 2.6 gpm - s.s. AISI 316

Self-priming electric pump, 230V, for transferring of chemical liquids. Pump body and connections in stainless steel. Seal and O-rings in FKM.

UP2-PV PEEK gear pump 2.6 gpm with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

UP12/A-V5 water pressure system+ 1.3 gal tank

Water pressure systems equipped with accumulator tank. Protected by an integrated fuse. The pumps can supply up to 5 faucets at the same time and are suitable for boats up to 60 feet. Extremely compact, they are easy to be installed in the engine compartment.

VP45-S vane pump 11.9 gpm with integrated on/off switch

Professional range of self-priming electric 12 V and 24 V pumps for the refueling and transfer of water and diesel with ON/OFF switch integrated into the water-proof cap.

VP45-K Refuelling kit with 11.9 gpm vane pump

Kit for diesel refueling. Includes the vane pump with integrated by-pass valve and battery clips. Refueling gun, 6.6 ft priming hose, 9.8 ft delivery hose and intake filter.

VP45 Battery kit with 11.9 gpm vane pump

Self-priming electric vane pump with integrated by-pass valve. Aluminum body. Two options connection for 25 mm pipe. Rotor and vanes made of resin. Brush holder with EMI filter. Main applications: diesel and anti-freeze refuelling. Available also with case and handle for easy transport, On/ Off switch and battery clips.

UP12/A water pressure system PEEK gears 9.5 gpm

Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

UP1-JS impeller pump 7.4 gpm with integrated on/off switch

Professional range of self-priming electric 12V and 24V pumps. Ideal for bilge and waste water on any type of boat. ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

UP12/A-V20 water pressure system + 5.3 gal tank

Water pressure systems equipped with accumulator tank. Protected by an integrated fuse. The pumps can supply up to 5 faucets at the same time and are suitable for boats up to 60 feet. Extremely compact, they are easy to be installed in the engine compartment.

UP12-LOCK portable gear pump kit for oil and diesel

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps and for engines lubricating operations.

VP45/AC Vane pump 9.2 gpm

Self-priming vane pump for diesel refueling. 220V version. With integrated by-pass valve, aluminum body and flange, double possibility of connection. Heavy Duty.

M2R compressor reinforced version

Compressor reinforced version.

OCK8-E Reversible electronic oil change kit 2.6 gpm with flow regulation

Electronic oil change kit 2.6 gpm with integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate. The flow rate is also automatically adjusted according to the viscosity of the fluid to avoid cavitation. Best for oil and diesel transferring. Compact and Easy to operate and carry. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. NOW AVAILABLE !

UP10-XC heavy duty pump 4.8 gpm - s.s AISI 316 L

Self-priming electric pumps for transferring of liquids up to 101.5 psi pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.

UP2/E-BR bronze gear pump with electronic pressure sensor 2.6 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP8/E electronic water pressure system 2.6 gpm

Self-priming automatic electric pump with helical PEEK, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

VP45A-S vane pump 11.9 gpm with on/off switch, brass fittings

VP45, in all its versions, is also available with brass hose fittings ¾ BSP for hose Ø 3/4".

UP12/E-LOBR electronic pump for oils, bronze gears + SCS

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP14-LP PEEK gear pump 8.7 gal/min

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body, stainless steel shaft. Main applications: water transfer, cooling.

UP12/E-BR bronze gear pump with electr. pressure sensor + SCS 9.5 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP12-PV PEEK gear pump 9.5 gpm with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

UP12-LP PEEK gear pump 6.8 gal/min

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body, stainless steel shaft. Main applications: water transfer, cooling.

UP3/E-BR bronze gear pump with electr. pressure sensor + SCS 4 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP3/OIL-AC oil / diesel gear pump

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft.