Products : 67, 44, 180, 550, 90, 30, 50, 180 + 360, 360W and 300

UP10-MS/P Pump with Mechanical Seal, PEEK gears 4.75 gpm

Self-priming electric pumps with compact mechanical seal and helical gears in PEEK. The motor shaft is made of AISI316, with a nickel-plated brass body. Mechanical seal with EPDM or FKM components. The enhanced motor is designed for continuous use under pressure.

UP10-MS/XC Stainless Steel Pump with Mechanical Seal, PEEK gears 4.75 gpm

Self-priming electric pumps with compact mechanical seal and helical gears in PEEK. The drive shaft is made of AISI316, with a stainless steel body and fittings. Mechanical seal with EPDM or FKM components. The enhanced motor is designed for continuous use under pressure.

UP12/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps and for engines lubricating operations.

UP14-LO Bronze Gear Pump for Light Oils 8.7 gal/min

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps and for engines lubricating operations.

UP14-LP PEEK gear pump 8.7 gal/min

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body, stainless steel shaft. Main applications: water transfer, cooling.

UP2/E-BR bronze gear pump with electronic pressure sensor 2.6 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP2/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

UP2-P PEEK gear pump 2.6 gpm

Self-priming electric pumps with PEEK gears. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.

UP3/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

UP9/OIL (ex UP6/oil) gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

UP9-XA heavy duty gear pump with flange 3.2 gpm - s.s. AISI 316

Self-priming electric pumps for transferring of liquids up to 72.5 psi pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.

DP9 deck washing pump kit - 58 psi

Complete kits including an automatic self-priming electric pump equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchablel hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

DP9/E deck washing pump + electronic control 65.3 psi

Complete kits including an electronic self-priming electric pump with electronic control. Equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

M1 compressor

Air compressor for horns

OCK1 oil change Kit

Compact size oil change kit. Easy to operate and carry. Reversible: draws and fills oil. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. Available also with electronic control panel and 12/24V universal voltage.

OCK1-R Oil change Kit with integrated reversible switch

Compact size oil change kit. Easy to operate and carry. Complete with bronze gears pump, clips, fuse, hoses and accessories for transfer operations. Available also with electronic control panel and 12/24V universal voltage.

OCS6/E electronic Oil Change System - 6 BSP Valves

Compact oil change electronic systems for fixed boat installations. Conceived for oil fill and drain operations for all on-board uses like generators, engines, transmissions and catwalks. Their electronic control adjusts the speed of the pump according to oil viscosity/temperature and increases its speed during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation. OCS are indicated for a perfect cleaning of all on-board areas while avoiding leaks and dispersions on the boat floor. Easy to operate and carry.

OCS9/E electronic Oil Change System - 9 BSP Valves

Compact oil change electronic systems for fixed boat installations. Conceived for oil fill and drain operations for all on-board uses like generators, engines, transmissions and catwalks. Their electronic control adjusts the speed of the pump according to oil viscosity/temperature and increases its speed during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation. OCS are indicated for a perfect cleaning of all on-board areas while avoiding leaks and dispersions on the boat floor. Easy to operate and carry.

SP2 Shower pump kit

Shower kits complete with self-priming pump with electronic control. Equipped with helical PEEK gears, nickel-plated brass body and connections, integrated check valve. Complete with 4 m white hose with screw connections and hand washer equipped with built-in white container. The kit is especially suitable for yachts, rubber dinghies and sailing boats.

UP1 pump rubber impeller 9.2 gpm

Self-priming electric water pumps with selflubricating flexible impeller for prolonged service life and better performance. Nickelplated brass body with stainless steel shaft.

UP10/E electronic water pressure system 4.8 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits, campers.

UP1000 submersible pump 16.6 gpm

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

UP2 bronze gear pump 2.6 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP2/E electronic water pressure system 3.2 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP2-PV PEEK gear pump 2.6 gpm with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

UP500 Submersible pump 8.5 gpm

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

UP6 bronze gear pump 6.9 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP6/A water pressure system 6.9 gpm

Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

UP6/A-AC water pressure system with 5.3 gal tank

Water pressure systems equipped with accumulator tank. Protected by an integrated fuse. The pumps can supply up to 5 faucets at the same time and are suitable for boats up to 60 feet. Extremely compact, they are easy to be installed in the engine compartment.

UP6/E electronic water pressure system 6.9 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP6/E-BR bronze gear pump with electronic pressure sensor + SCS 6.9 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP66/E-DX electronic water pressure dual pump system 16.4 gpm

Self-priming water pressure systems with two connected pumps with electronic control Speed motor related to the flow rate. Reduced consumption and noise. Accumulator tank is not required. Protected against overloads. Pump functions monitored by 2 led. “Empty tank” signal and shut-off device.

UP6-P PEEK gear pump 6.9 gpm

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service, transfer of water.

UP6-PV PEEK gear pump 6.9 gpm with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

UP9 Heavy duty pump 3.2 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP9/E electronic water pressure system 3.2 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits, campers.

UP9/E-BR bronze gear pump with electronic pressure sensor + SCS 3.2 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP9-HD heavy duty pump with flange 3.2 gpm

Self-priming electric pumps for transferring of liquids. Pump body in nickel-plated brass. Main application: high pressure spraying.

UP9-P heavy duty gear pump 3.2 gpm - PEEK gears - FKM O-Ring

Self-priming electric pumps for transferring of liquids up to 72.5 psi pressure. Pump body in nickel-plated brass. Main application: high pressure spraying.