Pump accessories

BF20 bottom filter and hosefittings for tubing ø 3/4"

Reversible electronic system for oil fill and drain operations. The electronic control adjusts the speed of the motor according to oil viscosity/temperature and increases its speed during priming for faster operations. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation.

Oil change systems. The operative functions of the pump are electronically controlled by a membrane panel. The pump is equipped with 1 or 2 valves. Conceived for oil fill and drain operations. The electronic card adjusts the speed of the pump according to oil viscosity/temperature. It also increases the speed of the pump during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation.

Kit of cables and battery clips

Oil change systems. The operative functions of the pump are electronically controlled by a membrane panel. The pump is equipped with 1 or 2 valves. Conceived for oil fill and drain operations. The electronic card adjusts the speed of the pump according to oil viscosity/temperature. It also increases the speed of the pump during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation.

Oil change systems. The operative functions of the pump are electronically controlled by a membrane panel. The pump is equipped with 1 or 2 valves. Conceived for oil fill and drain operations. The electronic card adjusts the speed of the pump according to oil viscosity/temperature. It also increases the speed of the pump during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation.

RJ11 Black cable with coupler for SCS / PCS

Oil change systems. The operative functions of the pump are electronically controlled by a membrane panel. The pump is equipped with 1 or 2 valves. Conceived for oil fill and drain operations. The electronic card adjusts the speed of the pump according to oil viscosity/temperature. It also increases the speed of the pump during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation.

FKM impeller for UP1-J. Dimensions: 22 x Ø 40.5 mm - bore Ø 8 mm.

Transparent in-line filter with AISI 304 stainless steel net. Snap-on locking for easy inspection and cleaning.

BF25 bottom filter and hosefittings for tubing ø 1"

With the control panel for electronic pumps, it is possible to monitor the operation of the pump (run / fail / power / flow and low / high speed) and activate its main functions: on / off, error reset, low speed and high speed. With subsequent low / high button pressures, the best speed can be set based on the viscosity of the transferred liquid. For operation, simply connect the panel to the pump with the supplied 3 m cord or other 4-wire telephone cable and double termination RJ11 / 6. The terminal block on the rear allows control of the pump using external buttons and LEDs. With the USB socket you can access the main pump functionality through software developed by the customer in collaboration with our technical department.

Tube kit of ø8 (ø6) mm and ø6 (ø4) mm for oil pumps.

Deck hose kit with 15m/50ft retractible hose, spray gun, 3/4” connection. Nickel plated brass fittings and quick connection suitable for DQC.

Stainless steel accumulator tank for automatic pumps. Stainless steel connection. Butyl membrane for liquid foodstuff

The control panel for electronic pumps allows to remotely monitor the operation of the pump and interact with it. It is in fact possible to see when the pump is On and if there is still liquid to be transferred. Moreover, in case of arrest due to end of liquid or overload you can reset the alarm and restart the system without having to turn off the power. Finally, you can turn Off and On the pump with the simple push of a button. The panel can be mounted or recessed in a circular hole of diameter 70 mm, or with external mounting by fixing the provided square box with two screws. To operate simply connect the pump with the 3m cable supplied or another 4-wire phone cord and double-ended RJ11 / 6. In the back there is a terminal block that allows you to replicate the buttons and LEDs of the panel on an external circuit: this allows you to individually control the features on the dashboard or in a device designed by third parties.

Transparent in-line filter with AISI 304 stainless steel net. Snap-on locking for easy inspection and cleaning.

White coated steel accumulator tank for automatic pumps. Stainless steel connection. Butyl membrane for liquid foodstuff

Quick connection for washing pump, integrated in a built-in white container with cover and gasket. Particulary easy to install and suitable for fast washing operations thanks to the quick-click connector for the gun coil hose.

Transparent in-line filter with AISI 304 stainless steel net. Snap-on locking for easy inspection and cleaning.

Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x Ø 40.5 mm - bore Ø 8 mm.

White coated steel accumulator tank for automatic pumps. Stainless steel connection. Butyl membrane for liquid foodstuff

Stainless steel accumulator tank for automatic pumps. Stainless steel connection. Butyl membrane for liquid foodstuff