Products : Yes

UP3/OIL-AC oil / diesel gear pump

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft.

UP3/E-BR bronze gear pump with electr. pressure sensor + SCS 4 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

PW3-BN Black whistle 20/75 m, ø300 mm + Electric valve

Approved whistle complete with black horn Ø300 mm. Electric valve and mounting accessories, for compressed air operation 6/12 bar. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD’S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

UP6/E-BR bronze gear pump with electronic pressure sensor + SCS 6.9 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

TK1-SP3 weed killer Kit with UP3/E pump and 28.3 gal tank

Tank kit for fresh or salt water, complete with pressure pump. Suitable for shower systems, sinks and toilets.

PW2-BN Black whistle 12/20 m, ø200 with compressor

Approved signalling whistle complete with black horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

TK2-SP weed killer Kit with UP2/E pump and 17.7 gal tank

Tank kit for fresh or salt water, complete with pressure pump. Suitable for shower systems, sinks and toilets.

UP12/E-LO electronic pump for viscous liquids, PEEK gears

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: transfer of high viscosity water-based liquids.

TK1-SP weed killer Kit with UP2/E pump and 28.3 gal tank

Tank kit for fresh or salt water, complete with pressure pump. Suitable for shower systems, sinks and toilets.

BE2-C chromed Bell ø7.9 in

Approved signalling bells of polished brass or chromed, for vessels between 12 and 20 m in length, Ø 200 mm.

UP10/E-BR bronze gear pump with electronic pressure sensor + SCS 4.8 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP14/E-BR bronze gear pump with electronic pressure sensor + SCS 12 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP12/E-LOBR electronic pump for oils, bronze gears + SCS

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP12/E-BR bronze gear pump with electr. pressure sensor + SCS 9.5 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

A2/S twin plastic horns

Air horn complete with electric compressor, combined sound. Two plastic trumpets, complete with relay, tubing and fixing hardware.

A3/R horn, 3 plastic trumpets

Air horn complete with electric compressor, combined sound. Three plastic trumpets, complete with relay, tubing and fixing hardware.

UP1-J/OIL flexible FKM impeller pump for oil

Flexible FKM impeller pump for oil. Self-priming electric pump with flexible impeller in FKM for oil. Nickel-plated brass body, stainless steel shaft.

UP14-PV PEEK gear pump 12.2 gpm with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

BE3-C chromed Bell ø300 mm

Approved signalling bells of polished brass or chromed, for vessels between 20 and 75 m in length, Ø 300 mm.

UP8/E electronic water pressure system 2.6 gpm

Self-priming automatic electric pump with helical PEEK, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP14/OIL-AC pump for oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft.

UP6/OIL-AC pump for oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft.

UP9/A heavy duty water pressure system 3.2 gpm

Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

DP9 deck washing pump kit - 58 psi

Complete kits including an automatic self-priming electric pump equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchablel hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

UP2/E-BR bronze gear pump with electronic pressure sensor 2.6 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP10-XC heavy duty pump 4.8 gpm - s.s AISI 316 L

Self-priming electric pumps for transferring of liquids up to 101.5 psi pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.

UP6/A-AC water pressure system with 5.3 gal tank

Water pressure systems equipped with accumulator tank. Protected by an integrated fuse. The pumps can supply up to 5 faucets at the same time and are suitable for boats up to 60 feet. Extremely compact, they are easy to be installed in the engine compartment.

OCK8-E Reversible electronic oil change kit 2.6 gpm with flow regulation

Electronic oil change kit 2.6 gpm with integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate. The flow rate is also automatically adjusted according to the viscosity of the fluid to avoid cavitation. Best for oil and diesel transferring. Compact and Easy to operate and carry. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. NOW AVAILABLE !

HURRICANE TRUCK compact chromed horn with integrated compressor

Single sound electropneumatic horn. The integrated compressor enables immediate sound output when pressing the push button. No air hosing is therefore required. Powerful sound. Easy installation with single fixing point.

TR2/W compact twin tone horn with integrated compressor, White Edition

Two tuned sounds electropneumatic horn. The integrated compressor enables immediate sound output when pressing the push button. No air hosing is therefore required. Powerful sound. Easy installation with single fixing point.

P1 metal chromed horn, external mounting

Compressed air horn for external mounting. Metal chromed trumpet, complete with fixing hardware, excluding control valves.

UP2/A water pressure system 2.6 gpm

Self-priming electric pumps with PEEK helical gears, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

OCS5/E electronic Oil Change System - 5 BSP Valves

Compact oil change electronic systems for fixed boat installations. Conceived for oil fill and drain operations for all on-board uses like generators, engines, transmissions and catwalks. Their electronic control adjusts the speed of the pump according to oil viscosity/temperature and increases its speed during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation. OCS are indicated for a perfect cleaning of all on-board areas while avoiding leaks and dispersions on the boat floor. Easy to operate and carry.

EA2 Horn, 2 alternating notes, metal

Air horn complete with electric compressor, alternating sound. Two metal chromed trumpets, complete with relay, tubing and fixing hardware.

HT1/W compact horn with integrated compressor Winter Edition

Single sound electropneumatic horn. The integrated compressor enables immediate sound output when pressing the push button. No air hosing is therefore required. Powerful sound. Easy installation with single fixing point. The winter edition has better resistance to cold environments and salt presence, such as on roads during the winter.

P1/S brass chromed horn, external mounting

Compressed air horn for external mounting. Brass chromed trumpet, complete with fixing hardware excluding control valves. Available in two lengths: 500 and 590 mm.

VP45/AC Vane pump 9.2 gpm

Self-priming vane pump for diesel refueling. 220V version. With integrated by-pass valve, aluminum body and flange, double possibility of connection. Heavy Duty.

UP12-LOCK portable gear pump kit for oil and diesel

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps and for engines lubricating operations.

ATX1 stainless steel accumulator tank 0,1 gal with 3/8" T-nipple

Stainless steel accumulator tank for automatic pumps. Stainless steel connection. Butyl membrane for liquid foodstuff

DP12 deck washing pump kit - 72.5 psi

Complete kit including an automatic self-priming electric pump equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

DP3/E deck washing pump + electronic control 43.5 psi

Complete kits including an electronic self-priming electric pump with electronic control. Equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

BE2 bell ø7.9 in

Approved signalling bells of polished brass or chromed, for vessels between 12 and 20 m in length, Ø 200 mm.

UP12/A-V20 water pressure system + 5.3 gal tank

Water pressure systems equipped with accumulator tank. Protected by an integrated fuse. The pumps can supply up to 5 faucets at the same time and are suitable for boats up to 60 feet. Extremely compact, they are easy to be installed in the engine compartment.

UP1-JS impeller pump 7.4 gpm with integrated on/off switch

Professional range of self-priming electric 12V and 24V pumps. Ideal for bilge and waste water on any type of boat. ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

P1/LS brass chromed horn, external mounting

Compressed air horn for external mounting. Brass chromed trumpet, complete with fixing hardware excluding control valves. Available in two lengths: 500 and 590 mm.

UP3-PV PEEK gear pump 4 gpm with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

UP3-RK reversible pump kit 4 gpm with panel

Diesel transfer Kit with electronic control. During priming the speed of the pump increases and the system automatically shuts off in case of empty tank and short circuit. Being equipped with a reverse-flow function system, this kit is particularly indicated for tank balancing operations on board.

UP12/A water pressure system PEEK gears 9.5 gpm

Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

VP45 Battery kit with 11.9 gpm vane pump

Self-priming electric vane pump with integrated by-pass valve. Aluminum body. Two options connection for 25 mm pipe. Rotor and vanes made of resin. Brush holder with EMI filter. Main applications: diesel and anti-freeze refuelling. Available also with case and handle for easy transport, On/ Off switch and battery clips.

DP3 Deck washing pump kit - 43.5 psi

Complete kits including an automatic self-priming electric pump equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

TC1/P Mini horn - white ABS

Electropneumatic horn with reduced dimensions (total length 9,8 in) but with high sound output, complete with electric compressor, tubing and mounting hardware.

UP3-CK portable gear pump kit 4 gpm

Self-priming electric pump with bronze gears for diesel transfer. Featuring a new case with handle for improved protection and easy transport. Completed by On/Off switch, cable with integrated fuse and battery clips.

SP2 Shower pump kit

Shower kits complete with self-priming pump with electronic control. Equipped with helical PEEK gears, nickel-plated brass body and connections, integrated check valve. Complete with 4 m white hose with screw connections and hand washer equipped with built-in white container. The kit is especially suitable for yachts, rubber dinghies and sailing boats.

JE/DB black plastic horn, 2 alternating notes

New compact compressed air horn with alternating sound. Complete with electric valves and electronic alternating device approx. 300 cycles per minute, with option of combined sound. Black plastic trumpets. Installation in engine compartment.

UP1/AC 230V 50 Hz pump rubber impeller 7.9 gpm

Self-priming electric pump for transfer of fresh or salt water with flexible impeller of nitrile rubber which allows the problem-free transit of small particles. Nickel-plated brass body, shaft in stainless steel. Electric motor 0,55 kW.

A2/R twin plastic horns

Air horn complete with electric compressor, combined sound. Two plastic trumpets, complete with relay, tubing and fixing hardware.

MGT set of stainless steel horns + chromed shields

Compressed air horn for external mounting. Powerful sound. Stainless steel trumpet, complete with fixing hardware and front covers. Available in 530 mm, 630 mm and in a set of 2 pieces, with or without 24 V electric valve. Fits Mercedes ACTROS trucks.

PW2-BB white whistle 12/20 m, ø200 mm with compressor

Approved signalling whistle complete with chromed or white horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

BE3 bell ø300 mm

Approved signalling bells of polished brass or chromed, for vessels between 20 and 75 m in length, Ø 300 mm.

HURRICANE Built-in air horn with grill

Enclosure type electropneumatic horn for boats. A great innovation is the integrated compressor with horn, enabling immediate sound output when pressing the push button. No air hosing is therefore required. ASA grille and steel bracket. Typically marine low tone and extraordinary powerful sound. Rapid enclosure type installation. Suitable for commercial boats, ferries, yachts under 12 meters, sea dredges and rubber dinghies.

UP6-RK reversible pump kit 5.3 gpm with panel

Electronically controlled pumps for oil and diesel filling and draining operations. The touchpad electronic sensor adjusts the speed of the motor according to the liquid viscosity and temperature. Compact design. Fits in any engine room. Automatic shut-off in case of empty tank, short circuit and after 30 minutes of operation. Fittings with 1 or 2 valves available.

UP12/A-V5 water pressure system+ 1.3 gal tank

Water pressure systems equipped with accumulator tank. Protected by an integrated fuse. The pumps can supply up to 5 faucets at the same time and are suitable for boats up to 60 feet. Extremely compact, they are easy to be installed in the engine compartment.

UP3-S gear pump 4 gpm with integrated on/off switch

Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

EV-M312 Electric Valve 1/2" - ø12

Fuel cut-off solenoid valves for inboard engine boats, which meet RINA regulations, incorporating a hand release knob to open the valve manually in case of electrical failure, complete with ogive pipe fittings for tubing of various diameters. Brass body and stainless steel fixing bracket.

UP2-PV PEEK gear pump 2.6 gpm with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

HURRICANE Built-in air horn with chromed grill

Enclosure type electropneumatic horn for boats. A great innovation is the integrated compressor with horn, enabling immediate sound output when pressing the push button. No air hosing is therefore required. ASA grille and steel bracket. Typically marine low tone and extraordinary powerful sound. Rapid enclosure type installation. Suitable for commercial boats, ferries, yachts under 12 meters, sea dredges and rubber dinghies.

RIT brass chromed horn, external mounting

Twin tone horn for compressed air with brass chroed trumpets. For external mounting, complete with fixing hardware, excluding control valves.

SHARK Single horn, chromed , blister

Electromagnetic horn for small boats. High impact casing in chromed or white ASA and mounting bracket in AISI 304 stainless steel for easy installation. Very powerful sound and streamlined design. Excellent drainage system.

UPX-C/AC chem pump 2.6 gpm - s.s. AISI 316

Self-priming electric pump, 230V, for transferring of chemical liquids. Pump body and connections in stainless steel. Seal and O-rings in FKM.

BZ1 electronic buzzer 420 Hz

Electronic buzzer for fitment in vehicle interiors. Used as indicator for “lights on”, “fasten seat belts” etc.

UPX-C chem pump 4 gpm - s.s. AISI 316

Self-priming electric pumps for transferring of chemical liquids. Pump body and connections in stainless steel. Seal and O-rings made of FKM.

OCS9/E electronic Oil Change System - 9 BSP Valves

Compact oil change electronic systems for fixed boat installations. Conceived for oil fill and drain operations for all on-board uses like generators, engines, transmissions and catwalks. Their electronic control adjusts the speed of the pump according to oil viscosity/temperature and increases its speed during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation. OCS are indicated for a perfect cleaning of all on-board areas while avoiding leaks and dispersions on the boat floor. Easy to operate and carry.

PW3-BB white whistle 20/75 m, ø300 mm + Electric valve

Approved whistle complete with chromed or white horn Ø300 mm. Electric valve and mounting accessories, for compressed air operation 6/12 bar. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD’S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

90/1-L ø90 disc horn low tone

Electromagnetic disc horn, Ø90 mm, twin pole, high (-H) or low (-L) tone, complete with mounting hardware.

EM1 Stainless steel horn long

Single electromagnetic horn with stainless steel trumpet. Powerful acoustic unit carefully protected and manufactured of non-corrosive materials, complete with fixing hardware.

DP12/E deck washing pump + electronic control 87 psi

Complete kits including an electronic self-priming electric pump with electronic control. Equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

UP9-HD heavy duty pump with flange 3.2 gpm

Self-priming electric pumps for transferring of liquids. Pump body in nickel-plated brass. Main application: high pressure spraying.

UP10 heavy duty pump 4.8 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP14/AC PEEK gear pump

Self-priming electric pump for transferring diesel and water. PEEK gears, pump body and connections in nickel-plated brass, shaft in stainless steel. Seals in FKM and O-ring in NBR.

MGT/H stainless steel horn, 20.9 in + chromed front cover

Compressed air horn for external mounting. Powerful sound. Stainless steel trumpet, complete with fixing hardware and front covers. Available in 530 mm, 630 mm and in a set of 2 pieces, with or without 24 V electric valve. Fits Mercedes ACTROS trucks.

UP6/AC gear pump PEEK

Self-priming electric pump for transferring diesel and water. PEEK gears, pump body and connections in nickel-plated brass, shaft in stainless steel. Seal in FKM and O-ring in NBR.

UP6/A water pressure system 6.9 gpm

Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

UP3-R gear pump 4 gpm with integr. reversible switch

Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, light oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

TW1 train whistle

The original train whistle entirely manufactured in chromed brass, compressed air driven (min. 116 psi). Stainless steel fixing bracket. Includes 8 mm OD tube connections and excludes valves.

UP10-XA pump for weed killers 4.8 gpm - s.s. AISI 316

Self-priming electric pumps for transferring of liquids up to 101.5 psi pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.

HURRICANE TRUCK compact horn with integrated compressor

Single sound electropneumatic horn. The integrated compressor enables immediate sound output when pressing the push button. No air hosing is therefore required. Powerful sound. Easy installation with single fixing point.

MGT/L stainless steel horn, 24.8 in + chromed shield

Compressed air horn for external mounting. Powerful sound. Stainless steel trumpet, complete with fixing hardware and front covers. Available in 530 mm, 630 mm and in a set of 2 pieces, with or without 24 V electric valve. Fits Mercedes ACTROS trucks.

UP12-LO bronze gear pump for light oils

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps and for engines lubricating operations.

GT52 brass chromed horn, 23.6 in long

Compressed air horn for external mounting. Powerful sound. Brass chromed trumpet, complete with fixing hardware, excluding control valves. Available in three lengths: 750 mm - 680 mm - 600 mm.

ATX2 stainless steel accumulator tank 0.5 gal with 1/2" T-nipple

Stainless steel accumulator tank for automatic pumps. Stainless steel connection. Butyl membrane for liquid foodstuff

PW3-BC chromed whistle 20/75 m, ø300 mm + electric valve

Approved whistle complete with chromed or white horn Ø300 mm. Electric valve and mounting accessories, for compressed air operation 87/174 psi. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

UP3/A water pressure system 4 gpm

Self-priming electric pumps with PEEK helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

UPX/AC gear pump 2.6 gpm - s.s. AISI 316

Self-priming electric pumps, 230V, for transferring liquids for the food industry. Pump body and connections in stainless steel. O-rings of Silicone.

UP6-PV PEEK gear pump 6.9 gpm with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

UP9/E electronic water pressure system 3.2 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits, campers.

K3/4 Horn, 3 alternating notes, chromed metal

Air horn complete with electric compressor, three tones sounding in succession or in tune. Metal chromed trumpets, complete with relay, tubing and fixing hardware.

XB2 Electric air horn with double compressor

Very powerful electric air horn with deep and loud sound. Xtreme Blast is the most powerful two tones horn of its category. The use of two electric compressors, in fact, always ensures a proper level of sound pressure for each of the two acoustic trumpets. Highly versatile and compact, it can be easily installed on any type of vehicle. The horn is composed of two heavy duty compressors and a high resistance nylon base with two chromed metal trumpets. It is supplied with relay, air hoses and fixing hardware.

GT51 brass chromed horn, 26.8 in long

Compressed air horn for external mounting. Powerful sound. Brass chromed trumpet, complete with fixing hardware, excluding control valves. Available in three lengths: 750 mm - 680 mm - 600 mm.

PW2-BC chromed whistle 12/20 m, ø200 mm with compressor

Approved signalling whistle complete with chromed or white horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

FG3/4 horn, 3 alternating notes, metal

Air horn complete with electric compressor, combined or alternating sound. Three metal chromed trumpets, complete with relay, tubing and fixing hardware.

UP8/E-BR bronze gear pump with electr. pressure sensor + SCS 2.6 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seals and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP1-B ballast pump with rubber impeller 12 gpm

Self-priming electric water pumps with selflubricating flexible impeller for prolonged service life and better performance. Nickelplated brass body with stainless steel shaft.

UP9-XA heavy duty gear pump with flange 3.2 gpm - s.s. AISI 316

Self-priming electric pumps for transferring of liquids up to 72.5 psi pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.

UP10/E electronic water pressure system 4.8 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits, campers.

VP45-N Vane pump 11.9 gpm

Self-priming electric vane pump with integrated by-pass valve. Aluminum body. Two options connection for Ø 1" hose. Rotor and vanes made of resin. Brush holder with EMI filter. Main applications: diesel and anti-freeze refuelling. Available also with case and handle for easy transport, On/Off switch and battery clips.

UP3700 submersible pump 60.8 gpm

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

CL2 twin metal chromed horns

Air horn complete with electric compressor, combined sound. Two metal chromed trumpets, complete with relay, tubing and fixing hardware.

UPX gear pump 4 gpm - s.s. AISI 316

Self-priming electric pumps for transferring liquids for the food industry. Pump body and connections in stainless steel. O-Rings made of Silicone.

UP8-RE reversible electronic pump 2.6 gpm with flow regulation

Heavy duty Electronic Gear pump 2.6 gpm and 50.8 psi. Integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate; the flow rate is also automatically adjusted according to the viscosity of the fluid to avoid cavitation. Best for oil and diesel transferring. Compact and Easy to operate and carry.

UP3/AC gear pump

Self-priming electric pump for transferring diesel and viscous liquids. Brass gears, pump body and connections in nickel-plated brass, shaft in stainless steel. Seal in FKM and O-ring in NBR.

F3/R horn 3 alternating notes, plastic

Air horn complete with electric compressor, combined or alternating sound. Three plastic trumpets, complete with relay, tubing and fixing hardware.

GT50 brass chromed horn, 29.5 in long

Compressed air horn for external mounting. Powerful sound. Brass chromed trumpet, complete with fixing hardware, excluding control valves. Available in three lengths: 750 mm - 680 mm - 600 mm.

UP2000 submersible pump 33.3 gpm

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

UP1000 submersible pump 16.6 gpm

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

UP1500 Submersible pump 25.1 gpm

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

EV130/S electric valve

Electric valve particularly suitable when mounting horns in pairs, supplied complete with air inlet and outlet for Ø 8 mm OD tubing.

UP500 Submersible pump 8.5 gpm

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

SHARK Single horn, white plastic, blister

Electromagnetic horn for small boats. High impact casing in chromed or white ASA and mounting bracket in AISI 304 stainless steel for easy installation. Very powerful sound and streamlined design. Excellent drainage system.

AS3 automatic float switch for bilge pumps - Heavy Duty

Automatic float switch for bilge pumps.

UP9-P heavy duty gear pump 3.2 gpm - PEEK gears - FKM O-Ring

Self-priming electric pumps for transferring of liquids up to 72.5 psi pressure. Pump body in nickel-plated brass. Main application: high pressure spraying.

UP12-P PEEK gear pump 9.5 gpm

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service, transfer of water.

UP12 bronze gear pump 9.5 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

EW3 electronic whistle 20/75 m + fog signal

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

EMX2 Horn, stainless steel short

Single or double electromagnetic horn with stainless steel trumpet , bracket and membrane. New support design with integrated cable. Complete with fixing hardware.

UP14 bronze gear pump 12.2 gpm

Self-priming electric pump of small dimension with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP8-P heavy duty pump, PEEK gears 2.6 gpm

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.

UP8-XC heavy duty gear pump 2.6 gpm - s.s. AISI 316

Self-priming electric pumps for transferring of liquids up to 58 psi pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.

TP2 metal chromed horn, internal mounting

Twin tone horn for compressed air with metal chromed trumpets for installation in engine compartment, complete with fixing hardware, excluding control valves.

UP14-P PEEK gear pump 12.2 gpm

Self-priming electric pumps with PEEK gears. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service, transfer of water.

UP12/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps and for engines lubricating operations.

UP14/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps and for engines lubricating operations.

UP6-P PEEK gear pump 6.9 gpm

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service, transfer of water.

UP3/OIL-R revers.pump lubricating oil + integr.on/off switch

Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

90/1-H ø90 disc horn high tone

Electromagnetic disc horn, Ø90 mm, twin pole, high (-H) or low (-L) tone, complete with mounting hardware.

UP1-JR reversible impeller pump 7.4 gpm with on/off integrated switch

Professional range of self-priming electric 12V and 24V pumps. Ideal for bilge and waste water on any type of boat. ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.

UP2 bronze gear pump 2.6 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP3-P PEEK gear pump 4 gpm

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.

PW3 whistle 20/75 m, ø300 mm + Electric valve

Approved whistle complete with chromed or white horn Ø300 mm. Electric valve and mounting accessories, for compressed air operation 87/174 psi. Meets COLREG 1972 IMO class III regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

UP2/E electronic water pressure system 2.64 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

EW3-M electronic whistle 20/75 m + ampli + fog signal

Approved electronic whistle complete with loudspeaker, built-in membrane control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class III international regulations with RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, NMMA and BSH homologations. Includes mounting kit.

K2 Horn, 2 alternating notes, chromed metal

Twin air horn with alternating sound, like bus, complete with electric compressor, relay, tubing and fixing hardware. Metal chromed trumpets.

UP9-XC heavy duty gear pump 3.2 gpm - s.s. AISI 316

Self-priming electric pumps for transferring of liquids up to 72.5 psi pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.

M1 compressor

Air compressor for horns

TORNADO compact chromed twin tone horn with compressor

Two tuned sounds electropneumatic horn. The integrated compressor enables immediate sound output when pressing the push button. No air hosing is therefore required. Powerful sound. Easy installation with single fixing point.

TORNADO SPLIT compact twin tone horn with separated compressor

Electropneumatic horn with two tuned sounds, very powerful. Improved protection of the compressor from external agents. Easy installation with multiple fixing possibilities. Supplied with relay, fixing accessories and pipe.

TT2 Horn, metal chromed, external mounting

Twin air horn for external mounting, complete with electric compressor, relay and fixing hardware. Metal chromed trumpets, particularly suitable for installation on vans, campers, pick-ups, offroad vehicles, etc.

KS2 Metal chromed horn, external mounting

Twin tone horn for compressed air with metal chromed trumpets. External mounting, complete with fixing hardware, excluding control valves.

UP14/E electronic water pressure pump 12.2 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. PCS control panel included.

UP9/E-BR bronze gear pump with electronic pressure sensor + SCS 3.2 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

EV130 electric valve, blister

Electric valve suitable for any type of air horn, supplied complete with air inlet and outlet for Ø 6 mm OD tubing.

UP6 bronze gear pump 6.9 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

M3 Compressor AISI 304 2.1 gal

Compact electric compressor with 8 litres tank AISI 304. Working pressure 8 bar. Air flow rate 47 l/min.

UP1-M pump, rubber impeller 11.9 gpm

Self-priming electric pump with selflubricating rubber impeller. Now available in 3 different flow rates: 25, 35 and 45 liters/minute. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.

P1/1-E electronic horn 2 alternating notes

Compressed air horn with two alternating notes and possibility of combined sound. Complete with electric valves and electronic alternating device. Metal chromed trumpets. Installation in engine compartment.

UP8 heavy duty pump 2.6 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

JE/120 black plastic horn, internal mounting

Compressed air horn complete with electric valve. Installation in engine compartment.

UP9 Heavy duty pump 3.2 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP1-J pump, rubber impeller 7.4 gpm

Self-priming electric pump with rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.

UP10-HD heavy duty pump with flange, 101.5 psi, 4.8 gpm

Self-priming electric pumps for transferring of liquids up to 101.5 psi pressure. Pump body in nickel-plated brass. Main application: high pressure spraying.

PW2 whistle 12/20 m, ø200 mm with compressor

Approved signalling whistle complete with chromed or white horn Ø200 mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: RINA, LLOYD'S REGISTER MCA, BUREAU VERITAS, BSH and NMMA.

P1/2-E electronic horn 3 alternating notes

Compressed air horn with three alternating notes and possibility of combined sound. Available also with two different sounds on request, complete with electric valves and electronic alternating device. Metal chromed trumpets. Installation in engine compartment.

UP12/E electronic water pressure system 9.5 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

70/1-H ø70 disc horn high tone

Electromagnetic horn, Ø70 mm, twin pole, high tone. Suitable for narrow spaces and for motorcycles.

UP3/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

UP1 pump rubber impeller 9.2 gpm

Self-priming electric water pumps with selflubricating flexible impeller for prolonged service life and better performance. Nickelplated brass body with stainless steel shaft.

UP2/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

TORNADO Compact twin tone horn with integrated compressor

Two tuned sounds electropneumatic horn. The integrated compressor enables immediate sound output when pressing the push button. No air hosing is therefore required. Powerful sound. Easy installation with single fixing point.

UP3/E electronic water pressure system 4 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP3 bronze gear pump 4 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP6/E electronic water pressure system 6.9 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP9/OIL (ex UP6/oil) gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.