Products : 67, 120, 150, 360, 90, 180x2, 264 and 250

UP12-LP PEEK gear pump 6.8 gal/min

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body, stainless steel shaft. Main applications: water transfer, cooling.

UP12-P PEEK gear pump 9.5 gpm

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service, transfer of water.

UP12-PV/DX Dual PEEK Gear Pump 72 l/min with Check Valve

Self-priming water pressure systems with two connected pumps featuring helical gears in PEEK and built-in non-return valve. Body and fittings in nickel-plated brass, shaft in stainless steel. Main application: diesel and water transfer.

UP2/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

UP2-P PEEK gear pump 2.6 gpm

Self-priming electric pumps with PEEK gears. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.

UP3/OIL gear pump for lubricating oil

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.

UP8-MS/P Pump with Mechanical Seal, PEEK gears 2.64 gpm

Self-priming electric pumps with compact mechanical seal and helical gears in PEEK. The motor shaft is made of AISI316, with a nickel-plated brass body. Mechanical seal with EPDM or FKM components. The enhanced motor is designed for continuous use under pressure.

UP8-MS/XC Pump Stainless Steel with Mechanical Seal, PEEK gears 2.64 gpm

Self-priming electric pumps with compact mechanical seal and helical gears in PEEK. The drive shaft is made of AISI316, with a stainless steel body and fittings. Mechanical seal with EPDM or FKM components. The enhanced motor is designed for continuous use under pressure.

UP8-P heavy duty pump, PEEK gears 2.6 gpm

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.

DP12/E deck washing pump + electronic control 87 psi

Complete kits including an electronic self-priming electric pump with electronic control. Equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

DP3/E deck washing pump + electronic control 43.5 psi

Complete kits including an electronic self-priming electric pump with electronic control. Equipped with helical PEEK gears, in-line filter, nickel plated brass body and check valve. With 15 m stretchable hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

OCK1 oil change Kit

Compact size oil change kit. Easy to operate and carry. Reversible: draws and fills oil. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. Available also with electronic control panel and 12/24V universal voltage.

OCK1-E 12/24V Reversible oil/diesel transfer kit

Compact size oil change kit. Easy to operate and carry. Reversible: draws and fills oil. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. Available also with electronic control panel and 12/24V universal voltage.

OCK1-R Oil change Kit with integrated reversible switch

Compact size oil change kit. Easy to operate and carry. Complete with bronze gears pump, clips, fuse, hoses and accessories for transfer operations. Available also with electronic control panel and 12/24V universal voltage.

OCK8-E Reversible electronic oil change kit 2.6 gpm with flow regulation

Electronic oil change kit 2.6 gpm with integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate. The flow rate is also automatically adjusted according to the viscosity of the fluid to avoid cavitation. Best for oil and diesel transferring. Compact and Easy to operate and carry. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. NOW AVAILABLE !

OCS3/E electronic Oil Change System - 3 BSP Valves

Compact oil change electronic systems for fixed boat installations. Conceived for oil fill and drain operations for all on-board uses like generators, engines, transmissions and catwalks. Their electronic control adjusts the speed of the pump according to oil viscosity/temperature and increases its speed during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation. OCS are indicated for a perfect cleaning of all on-board areas while avoiding leaks and dispersions on the boat floor. Easy to operate and carry.

OCS5/E electronic Oil Change System - 5 BSP Valves

Compact oil change electronic systems for fixed boat installations. Conceived for oil fill and drain operations for all on-board uses like generators, engines, transmissions and catwalks. Their electronic control adjusts the speed of the pump according to oil viscosity/temperature and increases its speed during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation. OCS are indicated for a perfect cleaning of all on-board areas while avoiding leaks and dispersions on the boat floor. Easy to operate and carry.

SP2 Shower pump kit

Shower kits complete with self-priming pump with electronic control. Equipped with helical PEEK gears, nickel-plated brass body and connections, integrated check valve. Complete with 4 m white hose with screw connections and hand washer equipped with built-in white container. The kit is especially suitable for yachts, rubber dinghies and sailing boats.

UP10 heavy duty pump 4.8 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP10/E-BR bronze gear pump with electronic pressure sensor + SCS 4.8 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP10-HD heavy duty pump with flange, 72.5 psi, 4.8 gpm

Self-priming electric pumps for transferring of liquids up to 72.5 psi pressure. Pump body in nickel-plated brass. Main application: high pressure spraying.

UP10-P heavy duty gear pump 4.8 gpm - PEEK gears - FKM O-Ring

Self-priming electric pumps for transferring of liquids up to 7 bar pressure. Pump body in nickel-plated brass. Main application: high pressure spraying.

UP10-XA pump for weed killers 4.8 gpm - s.s. AISI 316

Self-priming electric pumps for transferring of liquids up to 101.5 psi pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.

UP12 bronze gear pump 9.5 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP12/E electronic water pressure system 9.5 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP12/E-BR bronze gear pump with electr. pressure sensor + SCS 9.5 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP12/E-LO electronic pump for viscous liquids, PEEK gears

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: transfer of high viscosity water-based liquids.

UP12/E-LOBR electronic pump for oils, bronze gears + SCS

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP12-LO bronze gear pump for light oils 6.87 gpm

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps and for engines lubricating operations.

UP12-PV PEEK gear pump 9.5 gpm with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

UP1500 Submersible pump 25.1 gpm

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

UP1-J pump, rubber impeller 7.4 gpm

Self-priming electric pump with rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.

UP1-J/OIL flexible FKM impeller pump for oil

Flexible FKM impeller pump for oil. Self-priming electric pump with flexible impeller in FKM for oil. Nickel-plated brass body, stainless steel shaft.

UP2 bronze gear pump 2.6 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP2/E electronic water pressure system 3.2 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP2/E-BR bronze gear pump with electronic pressure sensor 2.6 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP2000 submersible pump 33.3 gpm

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

UP2-PV PEEK gear pump 2.6 gpm with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

UP3 bronze gear pump 4 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP3/E electronic water pressure system 4 gpm

Self-priming automatic electric pump with helical PEEK gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP3/E-BR bronze gear pump with electr. pressure sensor + SCS 4 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP3-P PEEK gear pump 4 gpm

Self-priming electric pumps with PEEK gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: transfer of water and liquid additives for engines.

UP3-PV PEEK gear pump 4 gpm with check valve

Self-priming electric pumps with helical PEEK gears and integrated check valve. Nickel-plated brass body and connections. Stainless steel shaft. Main application: bilge service.

UP6/E-DX electronic dual pump system 13.7 gpm

Self-priming water pressure systems with two connected pumps with electronic control Speed motor related to the flow rate. Reduced consumption and noise. Accumulator tank is not required. Protected against overloads. Pump functions monitored by 2 led. “Empty tank” signal and shut-off device.

UP8 heavy duty pump 2.6 gpm

Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.

UP8/E electronic water pressure system 2.6 gpm

Self-priming automatic electric pump with helical PEEK, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

UP8/E-BR bronze gear pump with electr. pressure sensor + SCS 2.6 gpm

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seals and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

UP8-RE reversible electronic pump 2.6 gpm with flow regulation

Heavy duty Electronic Gear pump 2.6 gpm and 50.8 psi. Integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate; the flow rate is also automatically adjusted according to the viscosity of the fluid to avoid cavitation. Best for oil and diesel transferring. Compact and Easy to operate and carry.

UP8-XC heavy duty gear pump 2.6 gpm - s.s. AISI 316

Self-priming electric pumps for transferring of liquids up to 58 psi pressure. Pump body and connections in stainless steel. Main application: High pressure spraying of aggressive liquids.

VP45-N Vane pump 11.9 gpm

Self-priming electric vane pump with integrated by-pass valve. Aluminum body. Two options connection for Ø 1" hose. Rotor and vanes made of resin. Brush holder with EMI filter. Main applications: diesel and anti-freeze refuelling. Available also with case and handle for easy transport, On/Off switch and battery clips.